Why You Want to Use Liquid Roof Repair Coatings

If you own your RV long enough, it’s almost certain that you are eventually going to have to make repairs to the roof. Regular inspections can help lessen the frequency and severity of repairs, but there is no accounting for accidental damage. The sooner defects and damage are addressed, the easier and less expensive they are to fix. The final step in repairing RV roof damage is to coat the area with one of the many available liquid roof repair coatings.

The Advantages of Liquid Roof Repair Coatings

Liquid Roof Coatings

Liquid Roof Coatings

EPDM rubber has always been a favorite RV roofing material for a number of reasons. A rubber roofing material is better able to withstand the stress of constant movement that RVs are subjected to. Also, EPDM rubber roofs are less susceptible to extremes in temperature thus helping to insulate your coach and keeping you warmer in winter and cooler in summer. In the days before the development of liquid EPDM rubber, this type of coating could only be applied in sheets, which worked well until it became necessary to repair or replace part of the surface. Covering a repair area with a sheet of rubber was difficult at best because one was always left with the problem of what to do with the seam. Products like caulks and putties came out that attempted to address the problem, but nothing really seemed to do the trick. That all changed when liquid roof repair coatings made from EPDM rubber came on the scene. Now, because a liquid could quickly and easily conform to any shape, even a raised surface, it was finally possible to get a long-lasting seal on any repair.

Things to Consider When Using Liquid Roof Repair Coatings

All liquid roof repair coatings are not created equal, so what do they have in common? Liquid EPDM roof coatings will only adhere to surfaces that are clean, dry and free of any film or dust. Getting an area repaired and in that kind of condition takes time. The good news is liquid roof repair coatings are easy to apply. It’s pretty much the same as any other type of painting. That’s where the similarities between brands end. Because properly repairing an RV roof is labor and time intensive, you don’t want to spend any more time than is necessary getting the job done. Some liquid roof repair coatings require you to apply two coats in order to get a lasting finish. That doesn’t make any sense. First of all, if they can’t do the job in one coat, what assurance do you have that it will be done properly in two coats? Second, by requiring a second coat, they’ve added hours of drying time to the job. There is a product out there that provides a long-lasting finish in just one coat, saving you a lot of money and hours of time. If you went to the hardware store to buy interior paint for your house, which one would you buy; the one that takes two coats to cover, or the one that covers well in just one coat?

Tips for Using Liquid Roof Repair Coatings

If you are doing the repairs on the roof yourself, take some time while you’re up there to thoroughly inspect the whole roof, not just the obvious areas. Check around the base of the vents, antennae, air conditioning unit and around the roof’s edges. If you’ve taken the time to go up on the roof, it just makes good sense to be certain that you’ve accounted for everything.

RV Roof Waterproofing Before It Is Too Late

Keeping your RV in great shape is important if you want it to last for a long time. RVs are not cheap vehicles, so you need to provide the proper care and maintenance to ensure it stays in perfect order. This means more than just taking care of the oil and the engine maintenance, and it means more than buying new tires. You also have to think about what is over your head. Namely, the roof. The RV helps to keep you out of the rain and weather, which is something that many people end up taking for granted. It is only when they start to notice problems with leaking that they ever even consider their roof.

Roof Coatings

Roof Coatings

Before You Notice a Leak

Even if you do not have any leaks in your roof right now, that does not mean that your roof is safe. You should still take preventative measures to make sure that a leak doesn’t happen. This is true even if you have an RV that is relatively new. Using a permanent RV roof coating, such as RV Liquid Roof, will help to provide your vehicle with the added protection it needs. This type of coating helps to add protection that is needed for a vehicle like an RV, whereas typical roof coatings won’t. When it is applied correctly, it has the potential to last for decades.

By adding this coating before there is a problem with your roof, it means you will not have to worry about a leak. This is the type of peace of mind that anyone can get behind.

When You Already Have a Leak

Of course, not everyone is fortunate enough to have added the RV roof waterproofing coat before they noticed an issue. If you have already found a leak in your roof, it might not be too late. There are still options for you. The first thing you need to do is check to see where the leak might be coming from. There could be just one location, but you should examine the entire roof to see if there are multiple breaches that could allow water to get into the vehicle. Always be sure to check around the venting and other areas, as well, since these can be prone to problems, particularly with older RVs.

Once you have located the areas of the leaks, you can then clean the roof and apply the patches to help cover them up. However, you don’t want to stop there. You still want to use the RV Liquid Roof so that you can add that layer of coating to the top. Once you do this, it should stop any future leaks from occurring.

If you caught the problem before it caused serious damage, you should be fine. However, if the problem has been happening for a while, there may be deeper damage in the RV, or even mold growth, which you will need to address.

It Is Easy to Apply

One of the biggest benefits of this type of RV roof waterproofing is that it is easy for you to do, and you do not need to hire a professional. All you need to do is make sure you have the right tools and the right permanent RV roof coating. Follow the manufacturer’s instructions to be sure that you apply it properly. Essentially, all you will need to do is make sure the roof is clean, patched if needed, and then you can apply. It will go on easily, just like paint, and it only takes a short time to coat your entire RV roof. It is one of the best investments you can make.

Best Reasons to Use RV Liquid Roof Coating

With just a little work, you can keep your RV in great shape from top to bottom so you and your family can enjoy it for many more years to come. Make sure it gets oil changes as needed and that you have it checked out by a mechanic at least once per year. Be sure to add new tires as your old ones start to wear out, as well. Additionally, you must make sure that you are giving your roof the attention it deserves. Many people never think about the roof until it is too late and they have a leak.

By using RV Liquid Roof coating now, you can alleviate these problems before they start. Let’s look at some of the best reasons to start using this type of coating on your RV roof today.

RV Liquid Roof Coating

RV Liquid Roof Coating

Adds Longevity to the Roof

Just as with any type of roof, the RV roof is exposed to the elements, which means eventually, it will start to break down. Fortunately, with RV Liquid Roof coating, it is possible to lengthen the life of your roof substantially. When it is properly applied, it can provide protection for your roof for up to 20 years, ensuring that you will have less to worry about when you are heading out and trying to enjoy your vacations.

Works With Environmental Changes

Think about all of the things that can damage a roof. It deals with the wind and the rain, along with the sun and possibly snow depending on where you live. Even changes in the temperature can cause issues with the RV roof. Eventually, it will become brittle, and that is when leaks and similar issues start to occur. Using Liquid Roof for RVs will help to provide a protective layer between the roof and those elements. It stands up well to all manner of weather, as well as to UV rays. It is flexible, too, which means even if the roof expands and contracts during temperature changes, you do not have to worry about the coating cracking.

Easy to Apply

These coatings are simple to apply, even if you have little to no experience. Once you clean the roof and add any patches, if needed, you can apply it to the roof just like you would paint. It goes on easily, but you do need to make sure that you have a smooth and even coat. Fortunately, the formulation tends to make this easy. Even with a relatively large RV roof, this should not take you more than a couple of hours. It only needs to have a single coat, so you will be finished even sooner than you imagine.

Once it is on, it will begin providing protection immediately. It should cure in about a day or two. Ideally, you will have sunny and dry weather when it cures, as this will help the process move along faster.

The RV Liquid roof coating will provide protection for years to come, and you will find that it makes maintaining the roof easy. Just keep it clean of debris and check it occasionally for signs of damage from falling debris and the like, and it should be good to go.

It Is an Affordable Option

Finally, when you use RV Liquid Roof coating on your RV, it can help you to save a lot of money. Consider just how much money it would cost to make repairs to the roof, or repairs to water damage that occur because of a leak.

If you want to take care of your RV as best you can, adding one of these coatings is an ideal choice.

6 Benefits of Using Cool Roof Coatings on Your RV

If you own an RV, then you are among the privileged few who are lucky enough to have the means to travel across this great nation without having to stay in a hotel or motel every night. You can visit national parks, local campgrounds, beaches and more, and do it all in the comfort of your own home on wheels. Of course, you need to care for your RV, and that means using the right material to reseal your roof periodically. Cool roof coatings offer some important benefits that make these the go-to solution for many RV owners. What benefits might you see?

1. Keeping Your Cool

Perhaps the most significant benefit of cool roof coatings can be found in the name. They help keep your RV cooler. For anyone who has ever traveled during the summer in an area of the country where temperatures climb pretty high, that benefit cannot be overstated. You’ll find that the interior of your RV maintains a more consistent, lower temperature without the A/C cycling constantly.

cool roof coatings

Cool Roof Coatings

2. Reducing Energy Consumption

Another important benefit with cool roof coatings is that they can help you reduce your energy consumption. Sure, you’ll still need to run the air conditioner while you’re on the road, but once you park and connect to the host location’s power, you start relying on the local power grid to keep you cool. Yes, you pay for that with your lot rent or overnight fees, but responsible RV owners understand the importance of being able to reduce their overall energy consumption regardless.

3. A Longer Lasting Roof

It might seem odd to think that cool roof coatings can lead to a longer-lasting roof, but it’s true. Compare a roof coating formulated to reflect as much heat and sunlight with one that does not, and you’ll see that darker, more absorbent roof coatings oxidize more quickly, and are subject to a lot more wear and tear. You’ll replace the coating much more frequently with a product that is not formulated to reflect sunlight.

Long Lasting Roof

Long Lasting Roof

4. Less Wear on Internal Structures

While you need to be concerned about the lifespan of your roof coating itself, you cannot forget about the underlying structures. More heat absorbed by the roof material means more heat absorbed by internal structures. That equates to more thermal expansion, which leads to more wear and tear. With cool roof coatings, you do not need to worry as much about that wear and tear.

5. You’re More Comfortable

With a roof coating designed to reduce sunlight absorption and heat retention, you also get to stay more comfortable in your RV for longer periods. In fact, if you’re traveling in the mid to northern latitudes, you may be quite comfortable overnight without running the air conditioner at all. There’s a lot to be said for keeping your cool for longer periods, including the fact that you’ll get longer, more comfortable periods of sleep, which is something that we could all use.

6. Reduce Maintenance Costs

Finally, you will find that cool roof coatings can help you reduce your overall maintenance costs. Yes, you will still need to reapply your rubber roofing from time to time, but that need will be less frequent. Substructure deterioration is slowed, and because you’re running your air conditioner less, you experience less wear and tear on A/C system components, too. The overall result is a reduction in the costs of maintaining your RV.

As you can see, there are some very important benefits to be found with the right RV roof option. RV Liquid Roof offers a long-lived solution that helps you keep your cool.

How to Find and Install Liquid Roof Coatings

Spring is a time of heavy rain and wind in many parts of the United States. Recently, storms have ripped through the south and central plains regions, leaving many homes in very rough condition. Tornadoes and other heavy storms have caused considerable damage to homes and businesses, and in many cases, roofs need to be repaired.

There are few things more frustrating for a homeowner or business owner than having a roof coatings. A liquid roof coatings can cause serious damage to property and is often difficult to find and reach, and to properly handle the situation it is usually best to call in a trusted professional. Here are a few guidelines to follow when you attempt to find and install liquid roof coatings.

Locate the Liquid Roof Coatings

The first step in installing a liquid roof coatings is to properly locate the coating. In some cases, there are signs that are very easy to spot, such as water damage and staining on floors, ceilings and walls. The most common place for a roof to coating is where there is some sort of protrusion, such as a chimney or air vent, since they create an opening in the roof itself.

When attempting to locate a roof coatings, follow the stains upward toward the roof, which will often expose the problem. For homes and businesses with attics, this may involve searching with a flashlight. If you are unable to locate a hole or Coatings, try running water over the roof with a hose and assigning another person to watch the damaged areas for any coating as a result.

Take a Liquid Roof coatings Seriously

Some roof coatings are difficult to spot, and the damage may seem minimal. However, that does not mean that a roof Coatings should be taken lightly. Even if you have plans to replace your roof in the next few months, a roof coatings could cause major damage to a home or business in a short amount of time.

Noticing the signs of a liquid roof coatings does not necessarily mean it is a new issue, and you could already be at risk of issues like mold, damaged insulation or rotting wood. It is very important to install a liquid roof coatings quickly because water damage can weaken a structure and put you, your family or your customers in danger.

 Call in a Professional to Install liquid roof coatings

It is often difficult for someone with little experience in home repair or construction to properly diagnose a roof coatings. While it may seem simple to spot and repair a small roof coatings, home and business owners should be very careful to ensure the job is done right.

Because of the serious nature of roofing problems and the importance of fixing your roof coatings the first time, you should consider contacting a trusted professional to help. We depend on our roofs for shelter and safety, and a roof coatings can certainly put that in jeopardy. Call in an expert that will provide peace of mind that your liquid roof coatings is properly fixed.

Why Use Roof Coatings?

 Roof coating is a form of roofing membrane which is monolithic in nature and is applied fully. ­­It has some elastic properties which enable it to elongate and return to its original shape and size without any problems. Roof coatings come in a wide range of thicknesses, ranging from thickness of paint film all the way to 40 dry mils. What this implies is that it can easily be applied on another roofing membrane without any problems. This is particularly helpful as even a very thin layer of roof coating would sufficiently provide protection to an underlying system from rain, hail, harmful effects of sunlight including infrared and ultraviolet as well as physical damage.

If these are applied correctly and according to the recommended standards, roof coatings offer a seamless, protective surface which is an excellent proofing against leaks and water damage. These are acknowledged to be effective in providing an extended life to almost any underlying roof substrate. These provide a cool surface and protect against adverse weather conditions. It must be noted however that cool roof coatings should not be used upon existing shingles. This is due to the fact that these can prevent the normal drying procedures of shingles which would inevitably give rise to water damage and moisture issues. Care must also be taken when applying on asphalt shingles and asphalt roofs.

There are several benefits to use roof coatings as these have been proven to add up to 25 years to the life of a roof, as well as having the distinct advantage of reducing the amount of roof materials that are no longer in usable condition. They can play a significant part in ensuring that the house remains cool which would ultimately translate into lower electricity bills due to lesser air condition usage.

Risks Involved

The majority of flat roofs aren’t appropriately steep, which causes water to mess in several areas, particularly around the drain pipes and scuppers. Various roof coatings aren’t graded or guaranteed for “Ponding Water”, therefore might stop working pre-maturely if subjected to standing water for long intervals. Give serious attention to the overall performance and restrictions of the coatings being picked. Some companies will guarantee their coatings which includes ponding water. Usually, companies for polymer-bonded coatings don’t include guarantees for ponding water, but some polyurethane companies do.

Roof coatings are remarkably easy to install and apply on a growing number of surfaces. If you have a small or medium house, you can make a weekend project out of coating your roof – it is so simple that in most cases, hardly any professional help is required. However, in cases of large roofs, it is advisable to seek the assistance of professionals as there can be countless complications involved.

Keep in mind that roof coatings are not especially useful on surfaces that are expected to undergo consistent pressure and friction, such as pedestrian areas or traffic populated surfaces.

Right products for fixing RV roof leaks

When it comes to fixing RV roof leaks, it is important that the right product line is chosen; with Liquid Roof you are going to find that perfect product. Liquid Roof is often referred to as EPDM (ethylene, propylene, diene monomer) because of the ingredients that are used in the development. This product basically works as a sealant, and creates a glue like substance on the top of the RV’s roof, so that it can prevent water from seeping in, or other hazards entering the RV through the roof, or small crevices that might have formed along the sides and roof.

Simplified leak solution –
In the past, with RV roof leaks, owners had to use rolls of rubber to cover the leaks and holes; not only was this a time consuming and tedious process, it was also far more expensive to fix these leaks. Today, with this liquid rubber solution, not only are holes and leaks going to be blocked, the roof is also going to appear more even once you apply the liquid solution to resolve a leak, and prevent the water damage that would otherwise take place in your RV.

Simple application –
The liquid rubber can be applied anywhere the rubber rolls could be applied to, yet it is a much easier process, and requires only one step of laying out the liquid over the areas that are leaking. Regardless of the roofing material on your RV, you can apply this liquid rubber on to the roof, in order to help prevent the RV roof leaks, and cover up the patches or wholes that are on your roof. Wood, metal, or fiberglass, the liquid can simply be applied over the leak, and can patch up any whole, regardless of the size or depth of the hole that is found on the roof.

One coat application for any roof –
With the ability to withstand temperatures of up to 300 degrees F, you do not have to worry about the Liquid Roof melting, or possibly causing further damage some time down the road. One coat application is more than sufficient for RV roofs, and will cover up any damage or holes that might be leaking on the roof. UV radiation does not affect the quality of the liquid, and it can tolerate continuous exposure to severe weather conditions, so you do not have to worry about continually reapplying coats, for the Liquid Roof to hold up.

No matter how big or small the damage is, when you notice a leak in your RV’s roof, Liquid Roof is the product line to turn to for instant repair. Not only is it great for RV roof leaks repair, it is also going to save you quite a bit of time and money, since you do not have to take the RV in to a professional to fix. With the right product, you can repair your RV, and continually enjoy the use, no matter where you plan on taking your next road trip to.

Why flat roof coatings are the best option for roof surfaces

Flat roofs can cause serious problems that are extremely difficult to repair for people who own commercial buildings or homes especially if they do not have proper knowledge on how to do so. These owners should hire contractors who have sufficient knowledge about different types of roofing surfaces and their reaction with various roof coatings and avoid hiring any roofing contractor when they want to fix their problems.

The task of tracking down the source of leaks on the top of flat roof surfaces can be extremely difficult and in effect, the task of repairing these roofs can be very challenging. Leaks that occur on flat roofs can cause serious damage because they involve a certain type of water damage that needs to be fixed urgently before they cause the aforementioned damage.

flat roof repair

The aforementioned leaks may be many meters or feet away from the place where they enter the buildings and hence, urgent repair is necessary in order to prevent them from damaging both the roofs and the roof surfaces by forming large pools of water in between the roof surfaces. Commercial building owners and homeowners can repair them by using various ways or by following a few simple tips.

A total tear off roof surfaces that are damaged enables commercial building owners and homeowners to extend the lives of their flat roofs for many years without the need for them to maintain them by taking proper care of them. However, this option is not the best for most of them because it is very expensive and hence, it can cause them serious financial problems.

The application of roof coatings, which are available in various types, is the best way for commercial building owners and homeowners to extend the lives of their roofs. Elastomeric based or liquid EPDM rubber and asphalt-based coatings, which are easily available nowadays, can enable them to extend the lives of their roofs. Liquid Roof and Liquid epdm rubber coatings give better quality roof surfaces and hence, are a better option.

Asphalt based coatings, which are only ideal for asphalt-based roofs such as modified or felt bitumen, are available in black petroleum based liquid form. For this reason, commercial building owners and homeowners who choose to use them should ensure that they buy those that have fibers that are embedded by using fiberglass and have a warranty. These coatings are ineffective on metal roofs but are ideal for use on them.

Elastomeric based or liquid rubber coatings, which are also available in a liquid form, are rubber based. Although the people who use them can obtain their desired look by mixing them with colorants, they are white in color. These coatings have a unique ability to stretch by as much as 600% and hence, they are a better option as compared to the asphalt based ones.

Although both asphalt based and liquid epdm rubber coatings give commercial building owners and homeowners seamless roofs that do not leak if they apply them in a correct manner, liquid epdm rubber coatings are a better option because they are ideal for use on rubber roofs, concrete roofs, asphalt roofs and metal roofs. In effect, they enable them to resolve numerous roofs problems.

For product information or ordering Visit http://www.epdmcoatings.com or their facebook page http://www.facebook.com/liquidepdm or call them at 855-281-0940.

When your roof needs some assistance

We have heard from countless roofing companies and building owners alike; if at all possible recoat vs. replace.  First depending on the type of roof you have there is considerable cost of replacing a roof.  Roofers get more jobs since the costs are lower and the customer winds up saving money.  How do you know when you do need to re-roof the entire roof or just a section?  For starters there is the obvious you can see inside your building from the roof or when your roof has sagged to the point where the wood underneath has rotted.  These are two symptoms of a needed replacement.

If you are finding that you have periodic leaks or blackening/chalking of your roof then you are a candidate for re-coating.  There are many different types of coatings on the market ranging from acrylics, urethanes and elastomerics to some high end silicone products.  In addition, one that has had a significant amount of success is Liquid EPDM Rubber.  For the past 25 years it has been the choice for building owners, homeowners and roofers alike.  Unlike other recoating systems that require multiple coats and base primers Liquid Rubber is only a one coat application on most roof types.  Since it is 100% EPDM rubber it waterproofs immediately upon application and will withstand ponding water 365 days a year.  It is the only liquid epdm rubber in the world and is made in the U.S. A.  For a full technical overview of the product you can visit the technical data.  Another advantage of EPDM rubber is its ability to expand and contract.  We have provided a link to wikipedia so you can see the historic uses and versatility of EPDM in general.

For product information or ordering visit EPDM Coatings or call them at 855-281-0940.