Tag Archives: Liquid Roof

Why You Want to Use Liquid Roof Repair Coatings

Posted on by
Reply

If you own your RV long enough, it’s almost certain that you are eventually going to have to make repairs to the roof. Regular inspections can help lessen the frequency and severity of repairs, but there is no accounting for accidental damage. The sooner defects and damage are addressed, the easier and less expensive they are to fix. The final step in repairing RV roof damage is to coat the area with one of the many available liquid roof repair coatings.

The Advantages of Liquid Roof Repair Coatings

Liquid Roof Coatings

Liquid Roof Coatings

EPDM rubber has always been a favorite RV roofing material for a number of reasons. A rubber roofing material is better able to withstand the stress of constant movement that RVs are subjected to. Also, EPDM rubber roofs are less susceptible to extremes in temperature thus helping to insulate your coach and keeping you warmer in winter and cooler in summer. In the days before the development of liquid EPDM rubber, this type of coating could only be applied in sheets, which worked well until it became necessary to repair or replace part of the surface. Covering a repair area with a sheet of rubber was difficult at best because one was always left with the problem of what to do with the seam. Products like caulks and putties came out that attempted to address the problem, but nothing really seemed to do the trick. That all changed when liquid roof repair coatings made from EPDM rubber came on the scene. Now, because a liquid could quickly and easily conform to any shape, even a raised surface, it was finally possible to get a long-lasting seal on any repair.

Things to Consider When Using Liquid Roof Repair Coatings

All liquid roof repair coatings are not created equal, so what do they have in common? Liquid EPDM roof coatings will only adhere to surfaces that are clean, dry and free of any film or dust. Getting an area repaired and in that kind of condition takes time. The good news is liquid roof repair coatings are easy to apply. It’s pretty much the same as any other type of painting. That’s where the similarities between brands end. Because properly repairing an RV roof is labor and time intensive, you don’t want to spend any more time than is necessary getting the job done. Some liquid roof repair coatings require you to apply two coats in order to get a lasting finish. That doesn’t make any sense. First of all, if they can’t do the job in one coat, what assurance do you have that it will be done properly in two coats? Second, by requiring a second coat, they’ve added hours of drying time to the job. There is a product out there that provides a long-lasting finish in just one coat, saving you a lot of money and hours of time. If you went to the hardware store to buy interior paint for your house, which one would you buy; the one that takes two coats to cover, or the one that covers well in just one coat?

Tips for Using Liquid Roof Repair Coatings

If you are doing the repairs on the roof yourself, take some time while you’re up there to thoroughly inspect the whole roof, not just the obvious areas. Check around the base of the vents, antennae, air conditioning unit and around the roof’s edges. If you’ve taken the time to go up on the roof, it just makes good sense to be certain that you’ve accounted for everything.

6 Benefits of Using Cool Roof Coatings on Your RV

Posted on by
Reply

If you own an RV, then you are among the privileged few who are lucky enough to have the means to travel across this great nation without having to stay in a hotel or motel every night. You can visit national parks, local campgrounds, beaches and more, and do it all in the comfort of your own home on wheels. Of course, you need to care for your RV, and that means using the right material to reseal your roof periodically. Cool roof coatings offer some important benefits that make these the go-to solution for many RV owners. What benefits might you see?

1. Keeping Your Cool

Perhaps the most significant benefit of cool roof coatings can be found in the name. They help keep your RV cooler. For anyone who has ever traveled during the summer in an area of the country where temperatures climb pretty high, that benefit cannot be overstated. You’ll find that the interior of your RV maintains a more consistent, lower temperature without the A/C cycling constantly.

cool roof coatings

Cool Roof Coatings

2. Reducing Energy Consumption

Another important benefit with cool roof coatings is that they can help you reduce your energy consumption. Sure, you’ll still need to run the air conditioner while you’re on the road, but once you park and connect to the host location’s power, you start relying on the local power grid to keep you cool. Yes, you pay for that with your lot rent or overnight fees, but responsible RV owners understand the importance of being able to reduce their overall energy consumption regardless.

3. A Longer Lasting Roof

It might seem odd to think that cool roof coatings can lead to a longer-lasting roof, but it’s true. Compare a roof coating formulated to reflect as much heat and sunlight with one that does not, and you’ll see that darker, more absorbent roof coatings oxidize more quickly, and are subject to a lot more wear and tear. You’ll replace the coating much more frequently with a product that is not formulated to reflect sunlight.

Long Lasting Roof

Long Lasting Roof

4. Less Wear on Internal Structures

While you need to be concerned about the lifespan of your roof coating itself, you cannot forget about the underlying structures. More heat absorbed by the roof material means more heat absorbed by internal structures. That equates to more thermal expansion, which leads to more wear and tear. With cool roof coatings, you do not need to worry as much about that wear and tear.

5. You’re More Comfortable

With a roof coating designed to reduce sunlight absorption and heat retention, you also get to stay more comfortable in your RV for longer periods. In fact, if you’re traveling in the mid to northern latitudes, you may be quite comfortable overnight without running the air conditioner at all. There’s a lot to be said for keeping your cool for longer periods, including the fact that you’ll get longer, more comfortable periods of sleep, which is something that we could all use.

6. Reduce Maintenance Costs

Finally, you will find that cool roof coatings can help you reduce your overall maintenance costs. Yes, you will still need to reapply your rubber roofing from time to time, but that need will be less frequent. Substructure deterioration is slowed, and because you’re running your air conditioner less, you experience less wear and tear on A/C system components, too. The overall result is a reduction in the costs of maintaining your RV.

As you can see, there are some very important benefits to be found with the right RV roof option. RV Liquid Roof offers a long-lived solution that helps you keep your cool.

What is Liquid Roof?

Posted on by
Reply

If you’re a business owner, then perhaps you’ve heard of EPDM roofing. It’s a low-cost and high-durability roofing solution that many businesses employ. What you might not know is that your RV’s roof may also an EPDM roofing solution. RV builders often choose EPDM for their roofs because it’s incredibly resistant to heat, weather and ultraviolet light.

So what is liquid roof? Is that something different? Actually, it’s exactly the same thing. Liquid roof is the liquid version of the EPDM roofing solution that your RV or business is already applying. If you already have one of these kinds of roofing solutions, then you’re probably already well aware of its benefits.

What Are the Benefits of Liquid Roof?

Liquid roof is designed for convenient repairs. Whereas other roofs that are based on asphalt and tar will require a hot application for any repairs that need to be made, repairs made with liquid roof are done cold and can be done in virtually any weather. This means that you’re not going to have to worry about blowtorches and dangerous chemicals when the repairs to your roof are being made.

Further, because liquid roof is made out of the same materials as EPDM roofing, it carries all of the same characteristics. It’s incredibly resistant to the effects of heat, fire, weather and ultraviolet light. This means that repairs that are made using liquid roof can be expected to have the same level of durability as the EPDM roofing itself.

How Can I Use a Liquid Roof Coating to Repair my RV Roof?

This part is easy. All you’re going to need to do is this: Get your hands on a canister of liquid roof, purchase an EPDM roller, and get whatever materials you’ll need to clean your RV’s roof and protect delicate places.

Once you’ve gotten your hands on all of these materials, you can generally make all of the repairs yourself within the space of an afternoon. First, you’re going to want to clean your RV’s roof. This is absolutely essential. Because the liquid roof needs to bond to your existing EPDM RV roof solution, you’ll need to make sure that it has a clean surface free of debris, dirt and grim to bond to.

After you’ve handled all of the cleaning, the next step is the application of the liquid roof. To do this, you’ll take the EPDM roller and apply to liquid roof as even as you can across the sites that you suspect are generating the leak within your RV. When you’re doing this, make sure that your application is even. An uneven application of liquid roof might lead to repair headaches later on down the line.

After the liquid roof has been applied, you’re almost all set. The only thing you need to do now is wait. Typically, liquid roof takes approximately 24 hours to bond to the EPDM roofing that’s already on your RV. Once the liquid roof has set, then you’re all set. Take that RV out back on the open road, and enjoy your conveniently repaired roof!

Use Liquid Roof to Repair Your Business’ EPDM Roof

Posted on by
2

If your business already has an EPDM roofing system installed, then you’re probably already aware of its many benefits. You’ve likely noticed how resistant it is to weather damage—even hail is incapable of lessening its efficacy. In addition, you’ve probably noted how resistant it is to fluctuations in temperature. If your business is located in a region where the winters are exceedingly cold and the summers and uncomfortably hot, then this is probably why you selected an EPDM roofing solution in the first place. Another benefit that is subtle, but nonetheless very important, is how resistant your EPDM roofing system is to damage from ultraviolet radiation caused by the sun.

In short, you’ve probably noticed that your EPDM roofing system is a “set it and forget it” kind of roofing choice. However, like anything in the world, there will come a time when your roof may need repair. If you’ve been worried about making repairs to your EPDM roofing system, then fear not. The truth is that repairing an EPDM roof can be incredibly simple. In most cases, you’ll only need to repair the part of your roof that needs repairing thanks to liquid roof.

What is Liquid Roof and How Does It Work?

Liquid roof is, in a nutshell, the liquid version of the EPDM roof that you already have over your head. Because it’s in the form of a liquid, liquid roof can be easily spread to fill in and repair cracks and tears in your existing EPDM roofing system.

Likely, however, you’ll not want to make these repairs yourself. Instead, you’ll want to get in touch with a qualified contractor who can apply the liquid roof. While they’re doing this, you’ll discover that the repairs will cause almost no, if any, disturbance to the course of your everyday business. Like the EPDM roofing system itself, the liquid roof is applied cold and then allowed to cure over the course of 24 hours. This means that you and your employees will not be subject to any noxious and potentially hazardous vapors while the liquid roof coating is being applied.

Are There Other Uses For Liquid Roof?

There sure are! If you’re not the type, then you might not know that liquid roof is a popular roofing solution for people that own RVs and motor homes. One of the primary reasons, aside from the weather and heat resistance, that owners of RVs and motor homes utilize liquid roof is the ease with which it can be applied. With a can of liquid roof and an EPDM roller, an RV owner can apply liquid roof to their RV in the space of an afternoon. After being left alone to cure for 24 hours, that RV owner will have a roof that will stand up to all the trials life on the road will put it through. The best part? If there’s ever a problem with the liquid roof, another coat will fix it right up.

How to Find and Install Liquid Roof Coatings

Posted on by
Reply

Spring is a time of heavy rain and wind in many parts of the United States. Recently, storms have ripped through the south and central plains regions, leaving many homes in very rough condition. Tornadoes and other heavy storms have caused considerable damage to homes and businesses, and in many cases, roofs need to be repaired.

There are few things more frustrating for a homeowner or business owner than having a roof coatings. A liquid roof coatings can cause serious damage to property and is often difficult to find and reach, and to properly handle the situation it is usually best to call in a trusted professional. Here are a few guidelines to follow when you attempt to find and install liquid roof coatings.

Locate the Liquid Roof Coatings

The first step in installing a liquid roof coatings is to properly locate the coating. In some cases, there are signs that are very easy to spot, such as water damage and staining on floors, ceilings and walls. The most common place for a roof to coating is where there is some sort of protrusion, such as a chimney or air vent, since they create an opening in the roof itself.

When attempting to locate a roof coatings, follow the stains upward toward the roof, which will often expose the problem. For homes and businesses with attics, this may involve searching with a flashlight. If you are unable to locate a hole or Coatings, try running water over the roof with a hose and assigning another person to watch the damaged areas for any coating as a result.

Take a Liquid Roof coatings Seriously

Some roof coatings are difficult to spot, and the damage may seem minimal. However, that does not mean that a roof Coatings should be taken lightly. Even if you have plans to replace your roof in the next few months, a roof coatings could cause major damage to a home or business in a short amount of time.

Noticing the signs of a liquid roof coatings does not necessarily mean it is a new issue, and you could already be at risk of issues like mold, damaged insulation or rotting wood. It is very important to install a liquid roof coatings quickly because water damage can weaken a structure and put you, your family or your customers in danger.

 Call in a Professional to Install liquid roof coatings

It is often difficult for someone with little experience in home repair or construction to properly diagnose a roof coatings. While it may seem simple to spot and repair a small roof coatings, home and business owners should be very careful to ensure the job is done right.

Because of the serious nature of roofing problems and the importance of fixing your roof coatings the first time, you should consider contacting a trusted professional to help. We depend on our roofs for shelter and safety, and a roof coatings can certainly put that in jeopardy. Call in an expert that will provide peace of mind that your liquid roof coatings is properly fixed.

Why Use Roof Coatings?

Posted on by
Reply

 Roof coating is a form of roofing membrane which is monolithic in nature and is applied fully. ­­It has some elastic properties which enable it to elongate and return to its original shape and size without any problems. Roof coatings come in a wide range of thicknesses, ranging from thickness of paint film all the way to 40 dry mils. What this implies is that it can easily be applied on another roofing membrane without any problems. This is particularly helpful as even a very thin layer of roof coating would sufficiently provide protection to an underlying system from rain, hail, harmful effects of sunlight including infrared and ultraviolet as well as physical damage.

If these are applied correctly and according to the recommended standards, roof coatings offer a seamless, protective surface which is an excellent proofing against leaks and water damage. These are acknowledged to be effective in providing an extended life to almost any underlying roof substrate. These provide a cool surface and protect against adverse weather conditions. It must be noted however that cool roof coatings should not be used upon existing shingles. This is due to the fact that these can prevent the normal drying procedures of shingles which would inevitably give rise to water damage and moisture issues. Care must also be taken when applying on asphalt shingles and asphalt roofs.

There are several benefits to use roof coatings as these have been proven to add up to 25 years to the life of a roof, as well as having the distinct advantage of reducing the amount of roof materials that are no longer in usable condition. They can play a significant part in ensuring that the house remains cool which would ultimately translate into lower electricity bills due to lesser air condition usage.

Risks Involved

The majority of flat roofs aren’t appropriately steep, which causes water to mess in several areas, particularly around the drain pipes and scuppers. Various roof coatings aren’t graded or guaranteed for “Ponding Water”, therefore might stop working pre-maturely if subjected to standing water for long intervals. Give serious attention to the overall performance and restrictions of the coatings being picked. Some companies will guarantee their coatings which includes ponding water. Usually, companies for polymer-bonded coatings don’t include guarantees for ponding water, but some polyurethane companies do.

Roof coatings are remarkably easy to install and apply on a growing number of surfaces. If you have a small or medium house, you can make a weekend project out of coating your roof – it is so simple that in most cases, hardly any professional help is required. However, in cases of large roofs, it is advisable to seek the assistance of professionals as there can be countless complications involved.

Keep in mind that roof coatings are not especially useful on surfaces that are expected to undergo consistent pressure and friction, such as pedestrian areas or traffic populated surfaces.

DIY Project: How to Apply Roof Coatings

Posted on by
Reply

Covering the roof with a protective layer is a common process for most homes. Roof coating covers the roof and prevents leaks, so it cuts down your energy costs. Roof coatings consist of liquid polymeric binders blended with pigments and other substances for durability and elasticity. Roofs that are coated with liquid membranes reflect UV sun rays, resulting in a cooler home interior as well as lower energy costs. Keeping a couple of things in mind will make this DIY project much easier to accomplish.

Prepare the roof

Clean your roof with a large broom to remove old branches, leaves, and other debris. Employ smaller wire brushes, putty knife or even a sand paper to take out old roof coating. Ensure that you don’t leave loose coating on your roof. Inspect your roof for any leaks. Remove any buildup of mildew using the solution of chlorine and water. You can clean your roof using a pressure washer machine if you have one. Smear any leakage areas with patching cement. Allow your roof to dry thoroughly.

Get the best roof coating

Find the best roof coating depending on your type of roof. Elastomeric roof coatings are normally used on concrete, brick, foam, metal, and aged aluminum. You can purchase roof coating at hardware stores in 5 gallon containers at different prices. The typical white and gray coatings will protect your roof, resulting in longer life cycles of the roof, and to reflect sunlight, resulting in lower costs of energy. Go for the correct type of product for your specific roof.

Properly apply roof coating

Plan your project in advance, ensuring you have a few hours of daytime as well as good weather. Blend the roof coating in the five-gallon bucket with the paint stir mixer according to the manufacturer’s instruction. Apply roof coating to the surface of the roof with a roller brush. Refer to manufacturer’s instructions for guidelines on the amount of coating you should apply per square foot of the roof.

Begin at one end of your roof and gradually work towards the other end, and ensure you have a way to come down. Don’t undercoat or overcoat any area. Allow your coating to dry thoroughly according to the manufacturer’s instructions. Coat your roof with another layer of coating using the same procedure. Using the right applications and product can prolong the life of your roof and give it an attractive appearance.

Who Needs Roofing Permits

Posted on by
Reply

Building permits are required in most areas for roofing replacement and for many roof repairs. While most localities do not require permits for painting, many do require that you have a permit for waterproofing.

If this is a do-it-yourself project, the first thing to do is check with your local building inspector. Your building and your project may fall under city or county ordinances. You can usually find the information that you need online or at least the phone number of who to call.

Many roofing jobs will require that you hire a roofing contractor. Some contractors are roofers. They do not do other types of roof repairs or roof maintenance. Other contractors are less specialized. In either case, you should make sure that the contractor you hire has experience, references and insurance to cover worker injuries or damage to your property.

An experienced roofer should be familiar with the building permit requirements in your area. Most contractors are accustomed to dealing with the local inspectors. They know how much time it takes to get a permit and how to get the necessary permits as quickly as possible. Dealing with the local bureaucracy can be annoying to say the least.

You will definitely need a permit if your roof is to be replaced unless you live in a very remote rural area. Minor repairs do not typically require a permit.

The proper disposal of waste products and used materials is one of the typical municipal requirements. Depending on the job, the contractor may be required to have an onsite dumpster specifically for the disposal of waste related to the job.

Special care may be necessary to ensure that waterproof coatings, VOCs and other types of potentially hazardous waste do not end up in the local water supply. The contractor will also need to provide a plan showing that the roof will be structurally sound after the job is completed.

The contractor may be required to provide a portable restroom for employees to use, if a public restroom is not readily available.

Those are just some of the things that the contractor may need to provide in order to complete your roof replacement or repair. The more experienced contractors can tell you about what will be required. Never be afraid to ask questions.

The main purpose of the roofing permit is to help ensure that the construction is done safely and correctly. Workers and the building occupants need to be protected. An experienced roofer will know what it takes to do the job correctly and safely.

The History, Benefits and Types of Cool Roofs

Posted on by
Reply

Cool roofs are not a new thing. In many parts of the world, people have understood the benefits of white outer walls and roofing for thousands of years. In the warmer climates of the Mediterranean and the Middle East, white buildings are the standard, not the unusual. Roofing materials and roof coatings for leak repair and leaks maintenance like liquid roof coatings and liquid rubber coatings are now also coming in white.

The U.S. Department of Energy began doing research in the 1980s concerning the benefits of more reflective roofing in urban environments. The goal was to reduce “heat islands” caused by black roofing and a combination of other factors in large cities.

In 2001, California changed its code to require cooler roofing on all low-slope buildings, primarily commercial and apartment buildings in and around cities. California’s goal was to reduce electricity consumption and prevent the need for the rolling blackouts that occurred during the summer of 2001.

Today, cool roofing products dominate the commercial and residential roofing market, partly because of the introduction of more reflective materials and different colors. White is no longer the only color to choose from.

The main benefit of cool roofs is lower summertime utility bills because of a reduced need for air conditioning. Owners of large buildings may be able to decrease the size of their air conditioning units. The lifespan of an existing air conditioning unit may be increased as the demand placed on the unit is decreased.

Certain types of products may expand the lifespan of the roof itself. For example, EPDM and other coatings applied to an existing roof provide additional protection from the elements. EPDM coatings create a more water resistant surface helping to prevent leaks and the need to replace the roof deck.

There are other indirect benefits. As more buildings in a city turn to cooler roofing products, the temperature around the city decreases. Vehicles require less air conditioning and use less gasoline.

People outdoors in the community are more comfortable. There is less smog and public health improves. Cool roofs indirectly reduce power plant CO2 emissions by reducing total electricity consumption.

Many different types of roofing materials are rated by the Cool Roof Rating Council (CRRC) for their ability to reflect solar radiation and emit heat rather than trapping it. In addition to the coatings that can be applied to nearly any type of existing roof, there are also new kinds of shingles, slate, tile and rubber polymers.

A good roofing contractor can help you compare the cool roofs that will work for your building. You may have lots to choose from.

When your roof needs some assistance

Posted on by
Reply

We have heard from countless roofing companies and building owners alike; if at all possible recoat vs. replace.  First depending on the type of roof you have there is considerable cost of replacing a roof.  Roofers get more jobs since the costs are lower and the customer winds up saving money.  How do you know when you do need to re-roof the entire roof or just a section?  For starters there is the obvious you can see inside your building from the roof or when your roof has sagged to the point where the wood underneath has rotted.  These are two symptoms of a needed replacement.

If you are finding that you have periodic leaks or blackening/chalking of your roof then you are a candidate for re-coating.  There are many different types of coatings on the market ranging from acrylics, urethanes and elastomerics to some high end silicone products.  In addition, one that has had a significant amount of success is Liquid EPDM Rubber.  For the past 25 years it has been the choice for building owners, homeowners and roofers alike.  Unlike other recoating systems that require multiple coats and base primers Liquid Rubber is only a one coat application on most roof types.  Since it is 100% EPDM rubber it waterproofs immediately upon application and will withstand ponding water 365 days a year.  It is the only liquid epdm rubber in the world and is made in the U.S. A.  For a full technical overview of the product you can visit the technical data.  Another advantage of EPDM rubber is its ability to expand and contract.  We have provided a link to wikipedia so you can see the historic uses and versatility of EPDM in general.

For product information or ordering visit EPDM Coatings or call them at 855-281-0940.