Tips for Finding Liquid Roof Leaks

If you have a liquid roof leak, it can be quite a bit more difficult to find than you might imagine. The area on your ceiling where the water is leaking does not always mean that the leak is directly above. Many times, the water will flow from the actual source of the leak and then pool in an area quite a distance away before it actually starts to leak. Therefore, finding the leak can require quite a bit of work.

Look at the Liquid Roof

If you are going to try to find the liquid roof leak on your own, you will need to get up on your liquid roof. You need to be as careful and safety conscious as possible when you are doing this, and it is a good idea to have another person with you to hold the ladder and to make sure they can get help in case something happens. When you are on the liquid roof, you should look for any elements of damage, such as missing or broken shingles, tears in the liquid roofing material, and areas where nails may be missing. In addition, check around the flashing for your vents, chimneys, and skylights. Cracks in those areas could be the source of the leak.

Sometimes, you may not notice any damage on the roof. It doesn’t mean it isn’t there, but you aren’t a professional roofer, so it is easy to miss things. One thing that you could do to help find the liquid roof leak is to conduct a “water test”. You will need to have two people to do this. One person will head into the attic and the other will stay on the ground outside and use a hose to spray the roof. They will start to spray at the bottom of the roof and work their way up until the person on the inside starts to see the area of the leak. Even then, you may not be able to find the actual source of the leak, as water can travel through small cracks before it actually starts to leak in the attic.

Hire a Professional

Liquid roof leaks are generally much easier to find when you don’t do it on your own. You should seriously consider bringing in a professional. They’ve seen all manner of leaks and they can trace the source of the problem far faster than you would be able to do on your own. In addition, once they find the liquid roof leak, they will let you know what needs to happen to repair the leak. They can also complete the repairs for you. If it is the rainy season, or nearing it, having a pro on the job can ensure your roof does not suffer any more damage.

In addition, it’s far safer to have a professional finding the liquid roof leaks. Getting up on your own roof is dangerous, and if there is any sort of pitch to the roof, the chance of an accident increases. It’s a better option for those who want their leaks found and fixed as quickly and safely as possible.

Liquid Roof Coatings Can Save Your RV

If you’ve got an RV of your own, you know how fun it can be to motor across the country for weeks or even months at a time, enjoying the scenery and going on countless adventures. Of course, any RV owner also knows what a massive investment an RV can be. Even the least expensive model of these vehicles can cost as much as a modest house; that means you need to protect your investment in every way you can.

The Silent, Stealthy Killer

There’s any number of things you need to worry about if you’re an RV owner, since the unique combination of residence and motorized vehicle means you’ve got the worries of both a home owner and a driver. There’s one issue that can be as deadly as it can be undetectable, though: a leaky roof. Even the smallest of pinholes in the roof of your RV will let water begin to infiltrate, and if you don’t notice it because that leak never makes it into your cabin, it can remain undetected for months – until you step through a spot of dry rot into the subfloor of your cabin.

Spot the Spot

Having a major leak repaired can cost tens of thousands, which is why it’s better to look for signs of leaks well before you end up with a nasty surprise. While you can’t always identify a leak from the inside of your RV, there is one way to spot where water is coming in – from the point of entry. All you need to do is climb up on the roof of your RV and (carefully) begin looking across the surface for any spots that seem soft, discolored, or damaged outright.

Liquid Roof Coatings to the Rescue

Once you’ve found a leak, you’ve got two options: take it to your dealership – where you’ll be charged an arm and a leg in labor costs – or do it yourself. You can indeed handle patching an RV roof yourself, thanks to Liquid Roof coatings that are commercially available. Made from a liquid form of synthetic rubber used in roofing materials all over the world, Liquid Roof and similar brands can be applied to a clean roof with a paint roller, which will seal any holes and protect your roof from the elements.

Do the Math

A can or two of a liquid roof coating may not be cheap, but the benefits of resealing your RV roof – and doing it yourself without any help from a technician at your RV dealership – is going to cost you much less in the long run. Most manufacturers of liquid roof coatings offer extended warranties on their products from anywhere between five and ten years, which means that a single application, while not inexpensive, is a small price to pay for ensuring the roof of your serious investment is in good shape for years to come.

Liquid Roof Coatings with an EPDM Coating

There’s nothing worse than having to take your RV back to the dealership because a nasty leak has caused thousands of dollars’ worth of damage to your vehicle. Mold and dry rot in the subfloor, ruined insulation under the roof, damaged upholstery in the cabin – you name it, a leaky roof is behind it.

Thankfully, if you catch a leak early enough – before it does all that damage – you can fix the problem yourself without ever having to roll across the asphalt of your dealership if you don’t want to. In fact, if you’re handy, and you don’t mind climbing up atop the roof of your RV itself, there are any number of products you can use to reseal that roof and stop that leak in its tracks.

Why Pay for Labor?

Purchasing an RV is a massive investment, and it’s important to keep it in good shape. You can take your RV into the dealership for sure, but most RV technicians will simply clamber up onto your roof and do exactly what you could have done yourself. The only difference is instead of purchasing those cans of liquid roof RV coatings and doing all the prep work yourself, you’ll have to pay for the cost of the material plus all that labor as well. If you can’t climb up onto the roof of your RV for whatever reason, that’s one thing – and you should never attempt to do so if you have even the slightest doubt about your ability to do the repairs yourself safely. But if you’re able-bodied and you’re careful while you’re up there, you can protect your investment without it costing you an arm and a leg.

The Secret of EPDM Coating

So what are these miracle products that can keep the roof of your RV sealed tighter than a drum? There’s any number of liquid roof coatings products, but the best ones are made out of a compound called EPDM. Short for ethylene propylene diene monomer, the main ingredients in the compound, it’s a synthetic rubber that’s fantastically tough and durable, often used as a roofing material on commercial buildings with flat roofs – and it can be applied as a liquid.

Roll It Out, Let It Dry, Get On with Your Day

Liquid roof coatings that use EPDM are so easy to put on you’ll wonder what took you so long. All you need to do is give the roof of your RV a serious deep cleaning – scrub off any rust with a wire brush, fill any large gaps with RV-grade caulking, and power wash all that road dust and grime off – and then just use a paint roller to apply it to your roof once it’s dried. Around a gallon of EPDM-based liquid roof is enough to cover 42 square feet of roof, though if you want a particularly thick coating – never a bad idea – most liquid roof manufacturers recommend you only cover around 30 square feet per gallon.

The Benefits of Liquid Roof Products

Everyone wants a strong, sturdy, reliable roof above their head. Whether it’s the roof on their home, the one above them at work or their RV, it goes without saying that people want to know the elements will stay on one side while they enjoy the other. These days, you have a number of options for ensuring that happens. However, you could waste a lot of time considering each and every one of them when liquid roof coatings are clearly the best.


When we talk about liquid roof coatings here, we’re referring to the kinds that use EPDM. Ethylene propylene diene monomer (M-class) is a type of rubber that is used in a number of different industries and relied on for its easy application and durability. Now you can use this rubber to handle your liquid roof repair job or put down a liquid rubber EPDM roof coating that will make your roof impenetrable.

Easy Repairs with EPDM

The moment you discover a leak in your roof, you want to attack it and get it fixed. You can use a liquid roof for RV repair or working on a normal structure. Either way, you want a roof with no leak and, in both scenarios, EPDM will provide it.

All you really need to do is clean the area where the leak occurred and then apply the EPDM. In no more than a couple hours, the problem should be gone. Of course, you can also hire someone to handle your liquid roof RV repair job or the one for your home or commercial building.

Coat Your Roof

As we mentioned above, it also makes a lot of sense to simply use a liquid rubber application before problems ever emerge. Even though EPDM is great for fixing leaks, ideally, you never want it to come to that. Instead, apply liquid rubber now and make sure you never have to worry about what the elements can do.

Great Durability

Speaking of which, we’ve touched on why liquid roof repair and coatings are so great, but consider that most people with this type of roof generally enjoy it for at least two decades. You could easily have yours up for years. Should anything cut its life short, just remember that repairs are a snap.

This liquid rubber application has been tested against the most extreme of temperatures too. From 40 below to 300 Fahrenheit, EPDM was able to survive without warping, cracking or otherwise showing any problems.


Despite all of this, you don’t have to worry that your new roof is going to cost you an arm and a leg. EPDM is actually very affordable. Those who only have a minor leak to fix on their building or RV will find it extremely easy to save money, even if they hire someone to do the job for them.

If you want a better roof, you want a liquid rubber EPDM roof coating. Just one application will last you for years, yet leave plenty in your budget.

How to Find and Install Liquid Roof Coatings

Spring is a time of heavy rain and wind in many parts of the United States. Recently, storms have ripped through the south and central plains regions, leaving many homes in very rough condition. Tornadoes and other heavy storms have caused considerable damage to homes and businesses, and in many cases, roofs need to be repaired.

There are few things more frustrating for a homeowner or business owner than having a roof coatings. A liquid roof coatings can cause serious damage to property and is often difficult to find and reach, and to properly handle the situation it is usually best to call in a trusted professional. Here are a few guidelines to follow when you attempt to find and install liquid roof coatings.

Locate the Liquid Roof Coatings

The first step in installing a liquid roof coatings is to properly locate the coating. In some cases, there are signs that are very easy to spot, such as water damage and staining on floors, ceilings and walls. The most common place for a roof to coating is where there is some sort of protrusion, such as a chimney or air vent, since they create an opening in the roof itself.

When attempting to locate a roof coatings, follow the stains upward toward the roof, which will often expose the problem. For homes and businesses with attics, this may involve searching with a flashlight. If you are unable to locate a hole or Coatings, try running water over the roof with a hose and assigning another person to watch the damaged areas for any coating as a result.

Take a Liquid Roof coatings Seriously

Some roof coatings are difficult to spot, and the damage may seem minimal. However, that does not mean that a roof Coatings should be taken lightly. Even if you have plans to replace your roof in the next few months, a roof coatings could cause major damage to a home or business in a short amount of time.

Noticing the signs of a liquid roof coatings does not necessarily mean it is a new issue, and you could already be at risk of issues like mold, damaged insulation or rotting wood. It is very important to install a liquid roof coatings quickly because water damage can weaken a structure and put you, your family or your customers in danger.

 Call in a Professional to Install liquid roof coatings

It is often difficult for someone with little experience in home repair or construction to properly diagnose a roof coatings. While it may seem simple to spot and repair a small roof coatings, home and business owners should be very careful to ensure the job is done right.

Because of the serious nature of roofing problems and the importance of fixing your roof coatings the first time, you should consider contacting a trusted professional to help. We depend on our roofs for shelter and safety, and a roof coatings can certainly put that in jeopardy. Call in an expert that will provide peace of mind that your liquid roof coatings is properly fixed.

Roof Coatings for Longer Roof Life

The best quality roof coatings can give you benefits whether you own a home or a commercial building. They protect your facility and its people and contents, and will extend the performance life of your roof. A light-colored roof will also lower the cooling load of your building.

Roofing Must Be Properly Maintained

There is a potential for problems with any roofing, if it is not properly installed and maintained. Simply applying a coating will not give you the most benefits if your roof needs structural repairs before the application.

If your roof has a corroded or rotting deck, wet insulation or a brittle or fractured membrane, it is not a good candidate to be coated. Roof coatings can extend your roof’s service life, even if it is aging, but it is not a substitute for proper repair and maintenance of the underlying structure.

If your roof has existing problems, these must be addressed before you have coatings of any type applied, states Facilities Net. Replace or repair any problem areas before you have your roof coated. Roof coating will only extend the life of your roof if there is proper structure beneath them.

Roof Surface Is Important

Using elastomeric roof coatings is not going to extend your roof life if the surface is not properly prepared. Materials that are solvent-based are generally more tolerant than those that are water-based, when used over chalk, loose scale or debris. However, if your coating fails because of poor roof preparation, the roof will never be as structurally viable as it could be if repairs and maintenance are done before coating is applied.

Coatings Must Be Properly Applied

The roofing industry is evolving to maintain the pace of various roof material coatings chemistry. One important facet to maximizing every roof application is ensuring that the adhesion of the membrane to the roof is secure. If the coating is not properly adhering to the substrate, it will not extend the performance life of your roof.

Adhesion is the joining or bonding of two materials, so that they work correctly. The roof coatings used must interact correctly with the roof surface, says The strength of this interaction is defined by these factors:
• The porosity and texture of the coating and its application techniques may all have an impact on surface interaction. The best roofs grab physically to the substrate. Air pockets must be eliminated, to enhance the contact.
• The surface contact area between the roof substrate and the coating will have an impact on the strength of the bond. The coatings should be properly spread over the surface of the roof in order to maximize the contact.
• Surface contaminants like debris or old repair paste can interfere with the proper contact between the coatings and the roof itself.

The chemistry between the roof substrate and the roof coatings is important for the strength of the adhesion that forms when the roof is cured. Manufacturers normally recommend specific types of coatings for a particular roof substrate, so that they will have maximum adhesion and will function together to increase the life of the roof.

Understanding the Various Types of Roof Coatings

Whenever a building is in need of a new roof or new roof coatings, most owners want to learn a bit about the different options available before committing to one of them. This makes sense, but the new roof or coating will often depend on the type of building, the shape of the current roof, and the budget. The following liquid rubber options for roof coatings are ideal for many different roofs. However, some might work better for different purposes than others will.

Asphalt Coating

One of the popular roofing options, particularly for businesses, is asphalt coating. This type of liquid features an asphalt and petroleum base. While it is popular, it is not always the right choice. In fact, the only times it is advisable to use this type of coating is for modified bitumen roofs or roofs that have an asphalt base. Some people have used them on metal roofs, according to an article on When they do though, the roof coatings tend not to last as long. For most roofs, the second option is much better.

Elastomeric Coatings

These liquid coatings are a great option for quite a few different types of flat and low angled roofs. Both homes and businesses, and even RVs can use this material to help protect their roof from all manner of issues. The EPDM coating is a high quality alternative and it offers some benefits that asphalt coating simply doesn’t have. For example, the coating can go on nearly any type of surface, save asphalt. Because it is so thin, yet resilient, it is possible to put it on many different areas of the roof, including tight spaces where it would be difficult if not impossible to use asphalt coating.

With the elastomeric material, you only need to use a single coat. Since it is strong enough and durable enough to last with just one coat, it that means a nice cost savings. In fact, a single coat can last up to three times longer than other roof coatings. Another one of the benefits of this type of coating is the ease with which one can apply it to a roof. The elastomeric coatings are very simple to apply with the same equipment used for painting in most cases.

The asphalt roofing is not quite as simple, and it requires a special touch to get “just right”. This generally means hiring the professionals for the job. The elastomeric roof coatings are a much simpler DIY option.

Which is Right for You?

These liquid coatings are just two options available for roofs. Some might work better with traditional shingles. Others might find the elastomeric coating is the best solution for their home or business. Since there are so many options, it pays to research the options and find the one that works the best for your particular roof. A little time spent researching the various types of roof material can go a long way in helping to make the right decision.

Protect Your Roof from The Cold And Snow With EPDM Roofing

Your roof can take a beating during the winter. Extreme cold, ice, and snow all take a toll on your roof and if you aren’t careful the winter elements can do extreme damage. Therefore, you need to make sure that your roof is properly prepared to withstand the winter weather. In particular, you may want to consider EPDM roofing coatings, which can help to prevent damage from a whole host of weather related problems. Doing so can you a significant amount of time and money spent on otherwise preventable roof repairs.

Common Winter Roof Problems

There are a variety of common winter-roof problems experienced by homeowners. Ice dams tend to be the most severe problem, the product of uneven temperatures on winter roofs. The top portion of the roof typically tends to be warmer than the bottom, especially when homes have heated attics. The ice at the top of roof melts, the water flowing down the roof. When this water flow reaches the lower, colder portion of the roof, however, it refreezes, causing the build-up of an ice dam. Water then begins to accumulate behind the dam and as it searches for an outlet is often begins to seep through the roof, causing leaks. The leaks, though often slow, can be quite insidious, doing a significant amount of damage.

How Can EPDM Roofing Help?

Unfortunately, you can’t get rid of the winter cold or snow. You can, however, properly winterize your roof to prevent or minimize any potential damage. EPDM roofing is probably the best way to protect your roof from the winter elements. These coatings, made from a type of liquid rubber known as EPDM, protect against a variety elements. Perhaps most notably EPDM is 100% waterproof immediately upon application, so it is the perfect way to protect way to protect your roof from leaks caused by ice dams and similar problems.

EPDM roofing coatings are also resistant to extreme temperature fluctuations, so freezing winter temperatures won’t damage them. In fact, EPDM is designed to withstand temperatures as low as -55F. EPDM is also renowned for it’s extreme durability and long-lifespan—they can easily last up to twenty years. Overall, EPDM roofing is an excellent investment, helping to prolong your roof’s lifespan by protecting it from the harsh winter elements.

DIY Project: How to Apply Roof Coatings

Covering the roof with a protective layer is a common process for most homes. Roof coating covers the roof and prevents leaks, so it cuts down your energy costs. Roof coatings consist of liquid polymeric binders blended with pigments and other substances for durability and elasticity. Roofs that are coated with liquid membranes reflect UV sun rays, resulting in a cooler home interior as well as lower energy costs. Keeping a couple of things in mind will make this DIY project much easier to accomplish.

Prepare the roof

Clean your roof with a large broom to remove old branches, leaves, and other debris. Employ smaller wire brushes, putty knife or even a sand paper to take out old roof coating. Ensure that you don’t leave loose coating on your roof. Inspect your roof for any leaks. Remove any buildup of mildew using the solution of chlorine and water. You can clean your roof using a pressure washer machine if you have one. Smear any leakage areas with patching cement. Allow your roof to dry thoroughly.

Get the best roof coating

Find the best roof coating depending on your type of roof. Elastomeric roof coatings are normally used on concrete, brick, foam, metal, and aged aluminum. You can purchase roof coating at hardware stores in 5 gallon containers at different prices. The typical white and gray coatings will protect your roof, resulting in longer life cycles of the roof, and to reflect sunlight, resulting in lower costs of energy. Go for the correct type of product for your specific roof.

Properly apply roof coating

Plan your project in advance, ensuring you have a few hours of daytime as well as good weather. Blend the roof coating in the five-gallon bucket with the paint stir mixer according to the manufacturer’s instruction. Apply roof coating to the surface of the roof with a roller brush. Refer to manufacturer’s instructions for guidelines on the amount of coating you should apply per square foot of the roof.

Begin at one end of your roof and gradually work towards the other end, and ensure you have a way to come down. Don’t undercoat or overcoat any area. Allow your coating to dry thoroughly according to the manufacturer’s instructions. Coat your roof with another layer of coating using the same procedure. Using the right applications and product can prolong the life of your roof and give it an attractive appearance.

Why flat roof coatings are the best option for roof surfaces

Flat roofs can cause serious problems that are extremely difficult to repair for people who own commercial buildings or homes especially if they do not have proper knowledge on how to do so. These owners should hire contractors who have sufficient knowledge about different types of roofing surfaces and their reaction with various roof coatings and avoid hiring any roofing contractor when they want to fix their problems.

The task of tracking down the source of leaks on the top of flat roof surfaces can be extremely difficult and in effect, the task of repairing these roofs can be very challenging. Leaks that occur on flat roofs can cause serious damage because they involve a certain type of water damage that needs to be fixed urgently before they cause the aforementioned damage.

flat roof repair

The aforementioned leaks may be many meters or feet away from the place where they enter the buildings and hence, urgent repair is necessary in order to prevent them from damaging both the roofs and the roof surfaces by forming large pools of water in between the roof surfaces. Commercial building owners and homeowners can repair them by using various ways or by following a few simple tips.

A total tear off roof surfaces that are damaged enables commercial building owners and homeowners to extend the lives of their flat roofs for many years without the need for them to maintain them by taking proper care of them. However, this option is not the best for most of them because it is very expensive and hence, it can cause them serious financial problems.

The application of roof coatings, which are available in various types, is the best way for commercial building owners and homeowners to extend the lives of their roofs. Elastomeric based or liquid EPDM rubber and asphalt-based coatings, which are easily available nowadays, can enable them to extend the lives of their roofs. Liquid Roof and Liquid epdm rubber coatings give better quality roof surfaces and hence, are a better option.

Asphalt based coatings, which are only ideal for asphalt-based roofs such as modified or felt bitumen, are available in black petroleum based liquid form. For this reason, commercial building owners and homeowners who choose to use them should ensure that they buy those that have fibers that are embedded by using fiberglass and have a warranty. These coatings are ineffective on metal roofs but are ideal for use on them.

Elastomeric based or liquid rubber coatings, which are also available in a liquid form, are rubber based. Although the people who use them can obtain their desired look by mixing them with colorants, they are white in color. These coatings have a unique ability to stretch by as much as 600% and hence, they are a better option as compared to the asphalt based ones.

Although both asphalt based and liquid epdm rubber coatings give commercial building owners and homeowners seamless roofs that do not leak if they apply them in a correct manner, liquid epdm rubber coatings are a better option because they are ideal for use on rubber roofs, concrete roofs, asphalt roofs and metal roofs. In effect, they enable them to resolve numerous roofs problems.

For product information or ordering Visit or their facebook page or call them at 855-281-0940.