Author Archives: Brian McCallister

RV Roof Protection with Liquid RV Roof

Posted on by
Reply

Protection for your camper’s roof translates into protection for your entire RV. Why do we say this? Because the roof is the part of your RV that provides shelter to the electronics, furniture, and other items housed within the interior. It also provides protection to you and your family when you’re using the camper.

If you spring a leak in the roof of your RV, there’s a good chance that if you don’t see it right away, you’ll have damage to other items too. You might have to replace walling inside the camper or flooring. Maybe the leak was right above the television so now you have to buy a new one of those and have the whole thing re-wired. All of this stuff can cost a lot of money and cause you a lot of headaches.

Now you see what we meant by saying protection for your roof means protection for the whole RV. So let’s look at something that will give you added protection for your beloved camper.

A Good Option

You can protect the roof of your RV from leaks, cracks, and other hazards by applying a coating Liquid RV Roof. It’s a protective coating that forms a membrane that is resistant to water, weather, wind, and even UV rays. It’s energy-efficient too so your AC unit and heating system will benefit from the application of this stuff as well.

Does It Matter What Your Roof Material Is?

It does matter what your roof is made of with some products. That being said, you can choose a product that adheres to all roof materials so you don’t have to worry about if it will meet your needs or not. Your best bet is to select an option that works with all of the following RV roof materials:

  • EPDM
  • Fiberglass
  • TPO
  • Metal
  • Alpha rubber
  • PVC
  • Butly rubber
  • Hypalon rubber
  • Wood
  • Roofs treated with other products

Is This Cost Effective?

Whenever you’re looking at taking on a project like this, it’s normal to wonder if what you’re about to do is going to be cost effective. Or at least it should be part of your thinking process.

We are on the side of yes, applying Liquid Roof is definitely going to be cost effective. We say this because the added protection you’ll get from applying a product like this to your camper’s roof will almost undoubtedly prevent some of the future repairs you would have had if you didn’t paint it on.

Liquid Roof gives you waterproofing, airtight sealing, energy efficiency, UV ray protection, wind resistance, scratch resistance, and staves off cracking. On top of all of that, you’ll have a roof that looks brand new once you’re finished and at a fraction of what it costs to actually have a new roof put on.

Is It Difficult to Apply?

This is one of the best features of Liquid Roof. It is not hard to apply it at all. You’ll start with a clean, dry roof surface. One that has been inspected and all necessary repairs have been completed. You’ll then tape of the area that you will be applying the Liquid Roof to. You’ll use a nap roller and evenly distribute it over the entire surface of the roof, working from the front to the back. Then you can finish up corners, edges, and detailing on roof structures with a paint brush.

Once you’ve covered the entire roof, you need to let it dry and cure for the next 24 hours. All that’s left after that is thanking yourself for making such a good decision for the future of your RV.

What You Need to Know about Liquid EPDM Roof Coatings

Posted on by
Reply

Your roof is one of the single most critical components about the structure, whether we’re talking about a residential home or a commercial property. That roof must stand for decades through sun exposure, as well as being subjected to freezing cold, scorching heat, rain, wind, sleet, snow, and more. Over time, leaks can develop, but Liquid EPDM roof coatings products can help breathe new life into your roof. What should you know about this product and how to use it? We’ll explore all that below.

Will It Work on Your Roof?

First, you need to make sure that Liquid EPDM roof coatings is the right material for your roof. In most cases, it will be fine. Liquid EPDM can be applied to almost any type of existing roof, including BUR, TPO, metal, rubber, and even asphalt shingles when properly prepared. Regardless of roofing material, though, you’ll need to clean and prepare the surface to receive the Liquid EPDM. This includes removing any oil-based coatings, as well as scouring the surface to remove dirt, mold, and even mildew. It must also be dry before you can apply the material.

Is It Waterproof?

Yes, Liquid EPDM roof coatings material is waterproof the instant that you apply it to the surface. That means even if it were to begin raining the instant you finished your repair, you would have peace of mind about the safety of the interior from water. However, that does not mean that the material dries immediately. It can take several hours to dry, and then the curing process requires additional time. However, throughout the curing process, you’ll find that Liquid EPDM conforms to almost any surface, whether horizontal or vertical.

Can It Be Used on Seams?

Liquid EPDM roof coatings material is ideally suited for areas where seams are present. This is one reason that RV roofs are repaired using a similar product (Liquid Roof, which is only designed for use on RV and trailer roofs). A single coating is enough to provide you with complete waterproofing across any seam.

Can It Be Used Instead of Caulk?

While Liquid EPDM roof coatings may not be able to completely eliminate the need for caulk within your roof environment, it can be used in many places where caulking has traditionally played a role. For instance, if you have roof-mounted HVAC units, you can use Liquid EPDM roof coatings material to seal all around the base and prevent water from penetrating under the unit, where it could begin to cause problems over time. The same applies for around flashing on roof vents and the like.

Will It Chalk?

Rubber roofing usually comes in sheet form, and is made from EPDM rubber. This offers ease of installation, but sheet rubber has problems, including the fact that it becomes chalky over time. This mars its appearance and makes cleaning a chore. However, Liquid EPDM roof coatings material does not chalk, while still being EPDM rubber, with all of that material’s other benefits.

What Tools Do You Need to Install It?

In order to apply Liquid EPDM roof repair, you’ll need some pretty basic tools, including the following:

  • An electric drill (corded)
  • A paddle mixer
  • A roller
  • A squeegee for larger applications
  • Mineral spirits to help with cleanup

These are all you’ll really need to get the job done.

Conclusion

In the end, Liquid EPDM roof coatings material is easy to apply on your own, creates a waterproof bond immediately, and offers outstanding durability. In fact, a single millimeter of thickness can give you up to 17 years of protection.

How to Apply Liquid Roof Paint Roofing

Posted on by
Reply

Liquid roof painting is becoming a popular choice for RV roofing, thanks to its durability, economical pricing, and versatile application. Plus, most liquid roofing products can be installed even by a novice, making them preferable to roofing materials like fiberglass or vinyl that may require a professional touch. If you have opted for a liquid roof for your RV, you will be happy to know that the application process is fairly simple.

Step One: Measure and Inspect Your Roof

The first thing that you need to do, once you’ve decided that you are going to use liquid roofing products, is to measure the roof space to see how much product you will need. Typically, a gallon of liquid roof paint roofing will cover 40-45 square feet. If you already know the dimensions of your roof, you can calculate the area rather than going topside to measure it by hand.

For example, if your RV roof measures 9.5 feet wide and 26 feet long, your total coverage area would be 247 square feet. This would require about six or seven gallons of liquid roofing.

Step Two: Choose Your Materials

Now that you know how much liquid roofing you need to buy, you can begin shopping for the product that you will use. EPDM liquid roof is a common product and it is available from all of the major brands in the RV maintenance and repair industry. Liquid roofing is generally sold in single gallon containers or 4-5 gallon buckets. Prices can range from as little as $50 for a gallon of liquid roofing material to more than $400 for a five-gallon bucket of high-end liquid roofing.

The variety of products can get confusing for some people, but you can buy this liquid roofing paint like you would anything else: find the products that fit your needs and your budget. The good news is that EPDM liquid roofing is generally compatible with all types of existing roofing surfaces and material, including vinyl, fiberglass, fabric, metal, wood, and existing rubber roofing.

Step Three: Clean and Prep the Roof Surface

One of the most important steps in the process of applying a liquid roof to your RV is cleaning and preparing the existing surface. The last thing that you want is to invest money in a new roof, only to have the application ruined or less effective because it didn’t adhere to the surface correctly. Remove all of the obvious debris and use a broom to sweep the roof thoroughly.

Important tip: Never use citric cleaners or petroleum-based products on an existing rubber roof because those can be damaging to the roofing materials.

Once you have removed all of the dirt and debris, use a cleaner and primer that is specifically designed for your existing RV roof. While you’re washing and rinsing the roof, you can inspect for damages, cracks, or other areas that may need to be addressed before applying the new liquid roofing paint material.

Step Four: Apply Liquid Roof Paint Roofing

Application is one of the easiest parts of the process of replacing your RV roof when you choose a liquid roof paint roofing product. You can simply pour the liquid onto your RV’s roof and then use a squeegee or brush to spread it around. A small brush is useful for ensuring a proper coating around the fixtures on top of your RV. For best results, start at one end of the RV and work your way back, so that you don’t have to walk on the newly applied rubber paint. Liquid roofing will be dry to the touch in about three or four hours and will cure completely within 24 hours of application.

How to Fix or Replace Leaky RV Roof Vents, Hatches, Skylights, and More

Posted on by
Reply

Keeping your RV’s roof in good condition is going to provide you with years of enjoyment. Over time, no matter the climate that you live in, the roof of your RV is going to start to show signs of age and wear. The first sign, in many cases, is a water leak caused by a deteriorated or damaged seal. This usually happens around roof vents, skylights, air conditioning units, and other fixtures on the RV, but can be problematic no matter where it occurs. If you are dealing with a leak from these areas, you can probably take care of the repair yourself.

Whether your RV roof is made of EPDM, TPO, or fiberglass, the repair and/or replacement process for vents, hatches, and other fixtures is going to be the same. To begin, you have to prepare the area by scraping away old caulk, sealant, and RV rubber roof adhesive that is in the way. This includes the removal of all silicone materials that are near or on the fixture that is being repaired or replaced. You aren’t going to get a new water-tight seal with old adhesive or caulk in the way.

For cleaning, you can use a scrub pad or sandpaper to create a smooth, clean surface after you have scraped off most of the sealants and damaged caulking or adhesive. If you need to access the screws for your hatch or skylight, make sure that those are accessible and scrape away the caulk around them so that you can remove the screws as needed. Whatever you are working on, you need to make sure that there is no more caulk, RV rubber roof adhesive, or other debris on the area where you will be working.

Choose Your New Sealant

As stated above, the exact product that you use for your roof repairs depends on the type of roof that you have and the type of seal that you are trying to create. Typically, however, there are two main categories that RV owners will choose from: fabric sealants like WebSeal and liquid caulks or sealing products. In some cases, you may employ the use of both.

Fabric-backed products are great for sealing around irregular surfaces like bolts, pipes, curbs, and angles. They are also a good choice for areas where you might notice water pooling, or you might need a wider seal than most caulking products can provide. This tape-style sealant can be molded to fit without springing back to shape, and remains flexible even in extreme temperatures. Keep in mind that most of these tapes are designed to also have a top protective coating on them for the best protection.

Another consideration that comes up when you are repairing or replacing the sealant on your roof is whether you need a temporary or permanent seal. RV rubber roof adhesive products come in both styles, and for obvious reasons. Some items, like the air conditioner, might require service regularly. In this instance, you would want to use a temporary sealant or adhesive product on the areas that will need to be accessed for service. When installing a fixture or sealing the edges of your RV roof, a permanent seal will be preferred.

Last-Minute Reminders

When replacing a vent or skylight, make sure that you use a knife or flat edge to loosen the metal flange from the roof. Be careful not to cut into the rubber roofing material when doing this, however. Also, make sure that you fill and seal all cracks, gaps, and joints when you have finished your repairs or replacements so that you get the long-lasting performance that you deserve. Finally, remember to look carefully at adhesives and sealants because they are designed for specific applications and uses, so you need to make sure that you have the right materials for the job.

EPDM Liquid Roof Applications: What You Should Know

Posted on by
Reply

If you search for RV roofing materials, you will likely come across a lot of information and resources for EPDM liquid roofing. This is one of the most popular options for RV owners who want a cost-effective, durable roofing solution that requires little maintenance and upkeep. Other roofing materials, such as fiberglass, are going to need much more routine care, and often cost more to install and maintain over time.

What is EPDM, though?

EPDM stands for Ethylene Propylene Diene Monomer, which is just a technical term for a synthetic rubber compound. This material is highly stable and flexible, and creates a binder during the curing process to create vulcanized EPDM rubber membranes and sheeting. For liquid roofing, the binding and curing process is not completed in the manufacturing process. The compound is left in a liquid state and combined with other ingredients to allow it to air-dry and cure to a flexible, watertight seal across the entire surface of the roof.

EPDM includes added oils to assist with curing and flexibility. This is part of what makes EPDM liquid roof applications so easy and effective. However, this material is also not resistant to oils or most solvents, which means that repair and maintenance products need to be compatible with EPDM or they will cause damage and premature deterioration and aging. The leading brands of RV maintenance, cleaning, and repair products all have EPDM-compatible products, however, so that shouldn’t be difficult to find if you know what you are looking for.

DIY EPDM Liquid Roof Applications

One of the biggest selling points, for many RV owners, is that liquid roofing can be done by just about anyone. Using a brush and roller or a squeegee, you can simply pour and spread the product across your RV roof and allow it to air dry to cure after you finish. RVs aren’t the only place you will find this roofing material, although they are among the most popular for liquid roofing. EPDM is also used for:

  • Mobile homes
  • Commercial buildings
  • Any building with a low slope or flat roof

Unlike sheet roofing and seamed products, liquid roofing creates a strong, seam-free membrane across the roof, which offers more protection and requires fewer repairs over time. This, combined with its affordability and versatile application, is what makes EPDM liquid roofing such a popular choice.

Frequently Asked Questions about EPDM Liquid Roof Applications

How long does EPDM take to cure?

Drying time depends on a number of factors, including humidity, temperature, and coating thickness. Typically, EPDM will be dry to the touch within a few hours of application. Full curing usually takes about 24 hours. Plus, the formula is designed to continue curing and bonding, so it will get stronger over time.

How much is EPDM liquid roofing?

Costs vary depending on the brand and type of liquid roofing that you choose, but a single gallon ranges from about $50 to $100. You can pick up 4-gallon or 5-gallon buckets for a few hundred bucks, in most cases. Keep in mind that a single gallon provides 40-45 square feet of coverage, so you may need less than you think.

Can I use leftover liquid roofing for maintenance and repairs?

If you have more materials than you need to replace or recoat your RV roof, you can save them for future needs. However, keep in mind that an EPDM liquid product is only going to be good for about a year. After that, the formula begins to separate and cannot be remixed. It’s best to buy only what you need and pick up repair kits or small containers of liquid EPDM for any repair or maintenance needs.

The Pros and Cons of Liquid Roof Coatings

Posted on by
Reply

Liquid roof coatings, also known as EPDM roofing or EPDM coatings, are a synthetic rubber roofing compound designed specifically for flat or low-slope roofs like those found in RVs and mobile homes. Although rubber roofing is also used on residential and commercial buildings, the available materials for RVs are usually quite different than the materials sold for building use. By getting to know this material, you can better understand whether or not it is the best choice for your RV roof.

The Advantages of EPDM Liquid Roofing

One of the biggest benefits of liquid roof coatings is the cost. Like rubber sheeting, liquid roof products are a fraction of the cost when compared to other non-porous or rigid roofing materials. It is also a really simple product to install or apply, so you can do the work yourself if you want. Even if you hire someone, you can trust that you will pay much less for labor because the job will go much quicker than other types of roof installation.

Liquid EPDM dries lightweight, which is another reason it works well on RVs. No additional reinforcement is needed, and you don’t have to worry about how much weight the roof is adding to your ride. The finished, cured rubber doesn’t scratch easily and can stand up to extreme temperatures and plenty of climates. Plus, when repairs are necessary, they are easy with caulking sealant and sealant tapes that are designed to work with your EPDM roof.

One of the first questions or concerns raised about rubber roofing is fairly obvious when it comes to RVs: rubber is black, so won’t it absorb heat? Yes, if you choose a product that dries black, your roof will absorb heat and cost more to cool in the summer months. However, many liquid EPDM products are being made with an added oxidizer that turns the rubber white with air exposure. This creates an even stronger layer of protection and a reflective surface that will repel heat rather than absorbing it.

The Disadvantages of EPDM Roofing

Liquid roof coatings don’t really have a lot of drawbacks. Some people don’t like the way that these roofs look when finished, but today’s products actually create a lot better look than you might think. Also, as mentioned above, black rubber roofing will absorb heat. The solution to this, however, is easy. White liquid roofing is available, as are products that will dry white.

How to Choose Your Roofing Material

Now that you know more about EPDM liquid roof coatings, you can make a more informed decision for your RV’s new roof. Use the advantages and disadvantages discussed here to help in your decision. Other factors that should be a part of your choice of new RV roofing include:

  • Personal taste or preference (if you have one)
  • Longevity
  • Maintenance and upkeep
  • Manufacturer’s recommendations for your specific RV (if any)

Ultimately, the decision is yours to make. However, by taking the time to compare your options and see all the benefits of liquid roof coatings, you might realize it is exactly what you need.

The Bottom Line

EPDM liquid roofing has been around for years, and for good reason. It is a cost-effective, easy-to-use material that anyone can apply. It provides full protection and requires much less maintenance and upkeep than other roofing materials. There are so many different styles of liquid roofing that there should be a product for just about every need. As an added bonus, many products are made of recycled materials, so you can feel good about your impact on the environment, too.

Top Features of the Best RV Liquid Roof Coatings

Posted on by
Reply

Most RV owners want to know one thing when choosing a roof: which are the best RV roof coatings, and why? There are a number of different products on the market today, which can seem intimidating to even the most seasoned RV owner. However, each has its place and purpose. You can learn a lot about the best products by looking at the leading brands and what they offer for coatings, sealants, and other roofing products and supplies.

Although no two brands are the same, the best RV roof coatings do have similar features that make them stand out among the rest. Here are a few things to keep in mind when you are looking for the best coating for your RV roof:

  • Multi-use Option: Although there are material-specific products on the market, coatings that are designed for use with multiple materials will typically give you the most universal uses. The best products don’t become the best by only serving one market, after all. Whether or not you choose a product that can be used on various materials, this is one factor that helps products rank higher.
  • Roofing-safe Ingredients: Despite the fact that substances like citric acids and petroleum oils can be damaging to rubber roofs, some products that contain them claim to be “safe and effective” as an RV protectant, sealant, or roof coating. Make sure that you know what products are safe for your roofing surface and stick to those coatings.
  • Protective Features: The best RV roof coatings have the most protection features to offer. They should offer protection from standard things like water damage and leaks, as well as UV rays, extreme temperatures, and other elements. The more protection a roof coating offers, the better investment it will be.
  • Affordable Pricing: Although people are willing to pay for quality, the best RV roof coatings won’t make you spend a fortune. They will provide a versatile, effective coating solution that is reasonably priced. Plus, DIY products are growing in popularity so the increasing demand for competitive pricing is only going to continue to save you money.
  • Convenience and Ease of Application: For the DIYer, convenience is a must in all projects and products. The top 10 brands of RV roof coatings on the market today all offer exactly that: a simple, convenient application that doesn’t take a lot of time and effort.
  • Self-Leveling: Although application with a mop or cloth is usually effective at relatively even distribution, it doesn’t always work. Choosing a sealant or coating that self-levels as it dries allows you to avoid pooling, which can lead to worsening damage or leaks down the road. It isn’t necessarily a must-have, but when you are coating an entire roof, or even a large part of it, the self-leveling feature is convenient and provides peace of mind.

According to many RV websites and communities online, the brands that have the best RV roof coatings include:

  1. Heng’s
  2. Dicor
  3. Proguard
  4. Rubberseal
  5. Flex Seal
  6. Kool Seal

However, each brand has its own features and pros and cons to consider. Use the tips provided here to help you find the best roof coatings for your RV, no matter what you have in mind. When chosen carefully, your RV roof coating can provide years of protection from water, weather, heat, UV rays, and other extreme elements. This product essentially works as an all-season protector, keeping your roof looking and working like new despite the elements. For those who travel often and lack covered storage in extreme weather, a roof coating might be the only way to protect their RV roof for the long haul.

Are You Suddenly Finding Yourself in Need of a Camper Top Coating?

Posted on by
Reply

It’s not how you planned on spending your tax return, but when your brother-in-law told you that his friend’s, wife’s, cousin had a used camper for sale; you just couldn’t turn it down. When you got it home, you took a closer look at your new baby, and that’s when you noticed that the roof was looking a little rough. Alright, don’t panic, you can handle this.

Assess the Condition

The first step is to carefully assess the condition of the camper roof. If you decide to go up on the roof, please be very careful! Are you are able to see any cracks or leaks? Be sure to check around the roof vents and along the roof edges. You’re probably going to see a lot of dirt and mildew stains, but that’s pretty normal. Alright, you decide that it would be a really good idea to start the camping season with a new look and a little peace-of-mind. It’s time to think about a camper top coating.

Choosing the Right Camper Top Coating

Chances are the roof of your camper is either metal, fiberglass or EDPM, which is a synthetic rubber surface. There are cheap ways to coat camper roofs, like water-proof paints for metal or fiberglass surfaces, but ordinary paints will chip and crack. Camper top coating isn’t something that you want to do often, so it just makes good sense to use products that are specifically designed for the job. One of the better choices is a liquid rubber coating, because it can be used effectively on most camper and RV roof surfaces.

Preparing the Roof’s Surface

No matter what type of camper top coating you choose, properly preparing the roof’s surface needs to be your first step. The roofs of campers and RVs are constantly exposed to absolutely everything that Mother Nature can throw at them; wind, dust, dirt, rain, snow and harsh sun. All dirt and mildew needs to be removed to ensure that the new coating will adhere properly. Start by sweeping or blowing any loose debris off of the roof. Next, you’ll need to thoroughly clean the surface. Be sure to check the caulking around the roof vents and replace as necessary.

Deciding on a Liquid Camper Top Coating

You’ve decided to use a liquid rubber roof coating because they are the most flexible and long-lasting. Which one do you choose? Time becomes a big factor in making the decision. You’ll need time for cleaning the roof, repairing any caulking, sealing the edges with butyl rubber tape and applying the coating. Some brands of liquid camper top coating require two coats, so choosing one that only needs a single coat will save you hours of time. If you’re doing the work yourself on a weekend, and perhaps are concerned about rain, every hour counts.

Sizing Up the Situation

Resurfacing your camper or RV roof is a good idea if it’s older and showing signs of wear. If you choose a liquid rubber camper top coating, you’ll get a surface that looks new and will last for many years. You can do the work yourself, but if you don’t feel comfortable with that, you should hire a professional. It shouldn’t be too expensive because the surface area is relatively small. If you buy the camper top coating yourself, you can shop around for the best price and further reduce the cost of hiring a roofer. Most of all, resurfacing the camper roof will give you years of worry-free camping.

Why Buy a Roof Coating for RVs?

Posted on by
Reply

You deal with a lot of stress every day. It may come from the job, bills, children, parents, health issues or a hundred other things. That’s one of the main reasons that you bought your RV, to get away from it all. Packing up the RV and taking it on the road is one of the greatest joys in your life. You get a chance to visit new places, meet new people and most importantly, rest and relax. Your coach is your home away from home, so you want it to be clean, comfortable and trouble-free. You won’t be able to relax, if everywhere you look, there are constant reminders of all of the things that need to be repaired. Keeping your trailer well-maintained and in good condition goes a long way toward giving you that peace-of-mind that you’re looking for. The single biggest factor that decides if your RV will stay in good shape is the condition of its roof. Damage to the integrity of the RV roof will translate into damage throughout the whole structure. That’s why it’s so important to regularly inspect and maintain your roof, and if it does need to be resealed, to use a roof coating for RVs.

Liquid Roof Coatings

Liquid Roof Coatings

A Roof Coating for RVs is Different.

Every roof needs to be repaired at some point. Consider for a moment all of the stress that every roof must endure: rain, hail, sleet, snow, wind and harsh sun. RV roofs are subjected to all of those things plus one more that is unique to them, movement. You may not have considered it before, but while you’re driving down the road, the structure of your RV is always moving, pitching and swaying. That’s why it’s important to use a roof coating for RVs. These days, most people use a liquid roof coating that’s made from EPDM, a synthetic rubber, because it remains flexible when dry and can withstand movement without sustaining damage.

Other Benefits of a Roof Coating for RVs

A roof coating for RVs that is made from liquid EPDM protects your coach from more than just the stress of movement. Your RV roof is much lighter than the roof of a house for obvious reasons, so it has a tougher time insulating the interior of the coach from heat and cold. A high quality EPDM liquid roof sealant resists the sun’s harsh ultraviolet rays as well as extremes in temperature, helping you stay cooler in the summer and warmer in the winter.

Choosing a Roof Coating for RVs

After performing a thorough inspection of your RV, you’ve found some defects that need to be addressed. You’ll want to choose a roof coating for RVs that is of a high quality and is both easy to apply and cost effective. If you have had to resurface your coach roof before, you know that there’s more than a monetary cost involved. To do the job right requires hours of prep work; the amount of time depending of course upon what work needs to be done. Most sealant brands also require that the work be completed when the weather is fair. Taking all of that into consideration, the last thing that you want is to have to apply a coat of sealer, wait hours for it to dry then have to apply a second coat. You’ll save a lot of time and money if you buy a roof coating for RVs that’s made from genuine EPDM and that covers well in only one coat. Now you can relax and enjoy your leisure time.

Why You Want to Use Liquid Roof Repair Coatings

Posted on by
Reply

If you own your RV long enough, it’s almost certain that you are eventually going to have to make repairs to the roof. Regular inspections can help lessen the frequency and severity of repairs, but there is no accounting for accidental damage. The sooner defects and damage are addressed, the easier and less expensive they are to fix. The final step in repairing RV roof damage is to coat the area with one of the many available liquid roof repair coatings.

The Advantages of Liquid Roof Repair Coatings

Liquid Roof Coatings

Liquid Roof Coatings

EPDM rubber has always been a favorite RV roofing material for a number of reasons. A rubber roofing material is better able to withstand the stress of constant movement that RVs are subjected to. Also, EPDM rubber roofs are less susceptible to extremes in temperature thus helping to insulate your coach and keeping you warmer in winter and cooler in summer. In the days before the development of liquid EPDM rubber, this type of coating could only be applied in sheets, which worked well until it became necessary to repair or replace part of the surface. Covering a repair area with a sheet of rubber was difficult at best because one was always left with the problem of what to do with the seam. Products like caulks and putties came out that attempted to address the problem, but nothing really seemed to do the trick. That all changed when liquid roof repair coatings made from EPDM rubber came on the scene. Now, because a liquid could quickly and easily conform to any shape, even a raised surface, it was finally possible to get a long-lasting seal on any repair.

Things to Consider When Using Liquid Roof Repair Coatings

All liquid roof repair coatings are not created equal, so what do they have in common? Liquid EPDM roof coatings will only adhere to surfaces that are clean, dry and free of any film or dust. Getting an area repaired and in that kind of condition takes time. The good news is liquid roof repair coatings are easy to apply. It’s pretty much the same as any other type of painting. That’s where the similarities between brands end. Because properly repairing an RV roof is labor and time intensive, you don’t want to spend any more time than is necessary getting the job done. Some liquid roof repair coatings require you to apply two coats in order to get a lasting finish. That doesn’t make any sense. First of all, if they can’t do the job in one coat, what assurance do you have that it will be done properly in two coats? Second, by requiring a second coat, they’ve added hours of drying time to the job. There is a product out there that provides a long-lasting finish in just one coat, saving you a lot of money and hours of time. If you went to the hardware store to buy interior paint for your house, which one would you buy; the one that takes two coats to cover, or the one that covers well in just one coat?

Tips for Using Liquid Roof Repair Coatings

If you are doing the repairs on the roof yourself, take some time while you’re up there to thoroughly inspect the whole roof, not just the obvious areas. Check around the base of the vents, antennae, air conditioning unit and around the roof’s edges. If you’ve taken the time to go up on the roof, it just makes good sense to be certain that you’ve accounted for everything.