5 Tips for Applying Liquid Roof Coatings

Your RV is an amazing asset – it gives you the ability to get up and go wherever you want, whenever you want. It offers freedom and enjoyment, as well as the ability to explore the entire US if you want. However, it will need some TLC over time. You’ll need to invest in regular maintenance for the engine, wash the exterior regularly, and generally make sure that it stays in good shape. You’ll also need to reseal your roof periodically. Liquid roof coatings are the best solution for this need, but applying them can be challenging. Here are five tips to help make things simpler for you.

1. Know When to Apply

This first tip has nothing to do with applying liquid roof coatings, and everything to do with whether or not you need to refresh your RV’s roof in the first place. If you notice that the roof material is leaving chalky residue on your hands, it’s fine – that’s all part of the aging process. What you need to look for are signs of damage like shrinkage of the existing rubber, seams that might be pulling apart, and the like. Knowing when to apply a new rubber coating is just as important as knowing how to do it.

2. Warm and Sunny

If you realize that it is time for liquid roof coatings, you need to time your work correctly. While the right rubber formulation will be waterproof in almost any conditions, you need to set yourself up for success. Wait until the weather is warm, dry and sunny. This will help ensure that you’re able to apply the liquid roof material evenly and quickly, and the warmth and sunshine will speed drying and curing.

3. Inspect Things First

Before you jump right into the application process, take a moment to inspect your RV’s roof. What you’re looking for here are signs of damage, as well as wear and tear. For instance, if you notice seams pulling apart, you’ll need to use a quality butyl tape to cover them. You may also need to caulk around vents in the roof of your RV, as well. Repair any signs of damage you might see to ensure that you can apply liquid roof coatings easily and evenly, and that the rubber will create an impermeable barrier.

4. Use the Right Tools

Before beginning the application, make sure you have the right tools for the job. You will need a paint roller and several replacement rollers. Ideally, you’ll opt for a roller with a short handle that can also accommodate a longer, broom-style handle. This will allow you to roll liquid roof coatings on the entire roof evenly without putting stress and strain on your back. In addition to a roller and handle extension, you should also have a decent paintbrush for getting up close to vents and other protrusions.

5. Clean and Dry

Our final tip is about making sure the roof surface is ready for the application of liquid of coatings. Dirt, debris, mold and mildew should all be removed. In some cases, you may need to just rinse the roof of your RV with clean water, but most of the time you will actually need to scrub it. Use a wide, soft-bristled brush and a mild cleaning solution to scour away anything that might prevent the rubber from adhering correctly. Then, you need to wait and let it completely dry before doing anything else.

With these tips, you should find applying liquid roof coatings simpler and easier. Take your time, repair any damage first, thoroughly clean and dry the roof, and make sure the weather is right for the work you need to do.

Leave a Reply

Your email address will not be published. Required fields are marked *