Elastomeric Roof Coatings Before They Worsen

Few things are quite as frustrating as realizing that you have a leak in your RV roof, or any roof for that matter. You need to make sure that you are proactive when it comes to these leaks, or the problems could become a lot worse. Let’s look at what could happen if you do not elastomeric roof coatings.

It’s Annoying

Of course, it’s annoying to have a leak. There is no doubt about that. When you have a leak, it also means it is unsightly. You do not want to deal with the appearance of water damage in your RV, and you certainly do not want to deal with all the other, larger problems leaks can cause.

Problems With the Electronics

You probably have electronics in your vehicle. It could be a microwave or any number of other items. You know what happens when water and electronics mix – they don’t. The water will short out and destroy the electronics. Replacing the electronics can be expensive. Having them short out can be downright dangerous. You do not want to have to deal with this problem, so repair the roof leaks before this happens!

Mold and Mildew

The water that is coming into the RV can also cause the growth of mold and mildew. This is unhealthy, and it has the potential to cause health problems. In addition, it will also cause the RV to stink, and that’s not going to be a very pleasant place to spend much of your time.

Destruction of the Roof, Walls, and More

Ultimately, if you are not taking care of these issues and if you do not elastomeric roof coatings, it can become a serious problem. It could eventually destroy the roof and the walls of your RV. This would create a need for some rather expensive repairs, and it would also mean that you might just have to give up on the RV altogether.

As you can see, you need to elastomeric roof coatings before they get any worse than they are. It is not a problem that is going to get better on its own. You need to make it a point to take care of the repairs on your own or find someone who can. Fortunately, you will find that many of the common problems are relatively easy to handle.

For example, you might need to replace a vent or some flashing. You might need to put some patches on the roof, as well. To give the roof that extra layer of protection to elastomeric roof coatings and to keep more from occurring, you will want to seal the roof, too. This means using a sealant like Liquid Roof.

Fortunately, the seal will go on quickly and easily. In fact, it goes onto the roof in a fashion very much like paint. You will need to have a roller and some brushes, and a sunny day, but that’s all there is to it. This can provide you with some great protection from leaks in the future.

What Does Liquid Roof Coatings Entail?

If you own an RV, it probably goes without saying that you’d go to any lengths to take care of it. Before it even becomes necessary, you should make sure you understand what liquid roof coatings entails so you’re prepared just in case.

What Is Liquid EPDM?

Liquid roof coatings refers to using EPDM. The full name of this material is ethylene propylene diene monomer (M-class). It can be used in liquid or solid form. Either way, the end result is the same: the surface of your RV room receives an impenetrable rubber membrane.

Why Do People Use EPDM for Liquid RV Roof Repair?

There are actually a number of reasons EPDM has become so popular for repairing RV roofs.

First and foremost, this type of liquid  roof repair really works. It has been studied many times, so there is evidence to back up the claim that EPDM will hold its tensile strength for decades.

Therefore, when you use EPDM to repair your RV’s roof, that’s most likely going to be the last time you ever need to. The repair will probably even last longer than the vehicle itself.

On top of that, it’s extremely affordable given how effective it is. Liquid EPDM is also very easy to apply, as you’re about to see.

How to Install EPDM to Repair Your RV’s Damaged Roof

Obviously, every type of roof damage is going to be a little different. If you’re looking at serious structural damage, you’ll want to address that before you start trying to use EPDM to do a liquid roof coatings job. In that type of situation, you could use EPDM as a bandage until you get somewhere to really fix it.

For the most part, though, EPDM is for fixing minor forms of damage like leaks. The first thing you’d want to do when that sort of thing happens is to make sure you find the source of the leak. There could be more than one.

Then you need to clean the area around the leaks. Any debris or dust will compromise the integrity of the seal and you’ll quickly end up with the same problem you started with.

Depending on the nature of the type of EPDM you’re using, you’ll next do one of two things. If it comes in a bottle, you’ll just spray it over the holes. Some will come out more like caulk.

The other type is for larger gashes or holes. This is the kind you mix with water before you apply it to the roof of your RV.

No matter which version you choose, be sure you read the instructions on the container first. EPDM is extremely user-friendly, but you should still take every precaution to make sure you’re using yours correctly.

Once the EPDM is applied, it won’t take more than 24 hours to fully cure. It could take a bit longer if the temperature outside is less than 55 degrees, but the difference shouldn’t prove to be too much of an inconvenience.

That’s all there is to it. Despite how simple EPDM is, it’s still extremely effective for repairing roof damage to your RV.

Get Your Liquid Roof Coatings Products in Order

Do you have a roof in need of repair? If you have a mobile home or an RV and you are looking to repair some issues or leaks with your roof, you will find that quite often, you can take care of these repairs on your own with little trouble. However, you still need to be prepared and you need to have the right liquid roof coatings products in place before you get started.

Types of Liquid Roof Coatings Products

You have quite a few things to consider when you are planning a liquid roof Coatings for your RV or mobile home. To determine exactly what you need, you need to perform an inspection of the roof first. This will give you an idea of the extent of the problem and everything that needs to be repaired. You will find that taking care of all the problems at the same time is the best option.

Assess the situation on the roof. Check the flashing and the vents to see if they could be the source of the problem, or at least a part of the problem. You might need to replace these. If you do need new elements for the roof, make sure you check the items you buy and make sure they are compatible with your make and model of RV. You might find that some of the caulking around the seams or vents is no longer viable.

If you have some leaks, or if you are just trying to take some preventative measures, a product such as Liquid Roof would be a good option for you. This is a simple to use liquid roof coatings product that goes on quickly and easily just like paint. It then provides your roof with a membrane covering that keeps it safe. One of the nice things about this product is that the installation is easy to do by just about anyone.

Other Items to Remember

Of course, you need to remember that the liquid roof coatings products should include the tools needed to clean your roof and get it ready for repair, as well as items needed to apply products such as Liquid Roof. For example, if you are going to be adding Liquid Roof to your RV, you will want to have a paint roller and brushes on hand. You will also want to have items to clean up any mess that you make. These are some of the other essential items you will need when it comes to roof repair products.

Big Jobs

In many cases, you can take care of the minor liquid roof coatings and maintenance on your own. However, that might not always be the case. You might find that the roof has too much damage or it has a problem you do not feel comfortable taking care of on your own. There is no shame in hiring a professional to take care of these types of repairs for you. They can ensure it is done the right way.

Liquid Roof Coatings Is Easy

If you have a flat roof that you need to protect from leaks and potential water damage, one of the best and simplest ways to do it is with Liquid roof Coatings. It is an effective method of creating a literal barrier for your roof that keeps out the water using Liquid Roof. Here are some tips to make the Liquid roof coatings go as smoothly as possible for you.

The Conditions

First, you need to make sure you are starting with a clean roof. This means removing dirt, grit, debris, grime, caulking and other elements on the roof that could interfere with the application of the Liquid Roof membrane. You then need to make sure the roof is completely dry. Otherwise, the membrane will not adhere properly. Be sure to check the weather as well. ideally, you want it to be sunny and clear, with temperatures around the 40s (Fahrenheit). This will help the product to dry and set quickly.

Find the Leak

When you are repairing your roof leaks, you have a couple of options. You can coatings the site of each leak individually, or you can coat your entire roof using Liquid roof coatings techniques. Of course, the first thing you need to do is find the leak or leaks in your roof.

First, look for any holes or cracks in the roof that would indicate the location of the leak. These are not always easy to see, so you will have to get up onto the roof and look closely. Also, if there are any seams in the roof, you will want to check those as well to see if there is a separation. Check around flashing as well, as this may have become separated. It might take some time, but check your entire roof for leaks.

You will find that Liquid roof coatings with Liquid Roof is easy and cost effective enough that applying the product to the entire roof is a good option. It will ensure that you have provided a barrier for all of the leaks in the roof and it provides a uniform look for the top of the roof.

Make sure you follow the manufacturer’s instructions when it comes to applying the Liquid Roof. It is easy to do and it only takes a single coat. Be sure to have all of the right materials on hand too – rollers, paintbrushes, cleaning materials, etc.

As you can see, getting your roof ready and applying the membrane is nice and easy, and most people should be able to complete Liquid roof coatings on their own with no problem. However, that does not mean you can take care of all roof coatings on your own. If the roof has other issues that are more problematic, such as a large and gaping hole, for example, you will need to speak with the professionals. When you have leaks though, or just want to protect from potential leaks, Liquid roof coatings with Liquid Roof is the way to go.

4 Reasons to Choose Liquid Roof Coatings

When damage strikes, or you notice a water leak from your RV’s roof, time is of the essence. Even a minor leak can transform into an expensive, time-consuming repair. Knowing your options is the best solution. For most RV owners, repairing the leak using Liquid Roof coatings makes the most sense and will save both time and money. Why choose this option when there are others available? Actually, there are quite a few reasons to make this choice.

Fast Application for Less Time Invested

One of the first reasons to choose Liquid Roof coatings for your RV roof repair is the significant speed of application. This substance allows you to apply just one coat to the roof, where others might require up to three coats. Moreover, you don’t really need any special equipment to apply it. A squeegee and a paint roller are really all you’ll need. With just those tools, you can usually coat a larger RV’s roof in about two hours.

Waterproof from the Start

With most roof repairs, a simple rain shower can spell disaster. They’re water-based, so if rain hits them before they’re cured, they will just wash away and you’ll need to go through all that time and effort again. That’s not the case with Liquid Roof coatings. This substance is waterproof from the instant it is applied to the roof of your RV. That means even if it rains halfway through your application, you’re safe.

Flexibility and Freeze Resistance

Most RV roof coatings on the market (other than Liquid Roof) are water-based. That means they’re easy to clean up, but it also means they’re more susceptible to problems than if they were based on another substance. For instance, water-based roof repair products are susceptible to damage from the freeze/thaw cycle. Liquid Roof coatings are not. In addition, they maintain their flexibility, unlike other products. This is an important consideration with the expansion/retraction pattern created by heat and cold, as well as the tension created in an RV roof while driving and taking curves.

Repairs and Replacements

While Liquid Roof coatings can be applied for spot repairs to rips, gouges and scratches, it can also be applied as an entire roof coating in just a few hours. This allows you to easily handle whatever life happens to throw your way, whether a low-hanging branch was responsible, or you’ve noticed that your aging RV’s roof has seen better days.

These are just a few of the many benefits offered by Liquid Roof coatings for your RV. There are others that are just as important, including the material’s superior resistance to ponding, its UV resistance, and the fact that even if it rains while the material is curing, you will end up with a strong, reliable repair that will last for years to come. Why take chances with something as important as roof repair?

What You Should Know About RV Roof Coatings

Your motorhome’s roof is the first line of defense against sun, rain, heat, cold, and of course, leaks. Keeping this component of your RV in good condition is vital to enjoying your days on the road and protecting your expensive investment from costly damage. While modern rubber roofing systems require slightly more maintenance than older materials like fiberglass, there are simple steps you can take to ensure that your roof serves you well for the life of your motorhome.

Know Your RV

The first thing you need to know is what kind of roof you have. Most late model motorhomes have one of two types of rubber coatings (the outer, waterproof layer – in other words, the part you can see). EPDM (ethylene propylene diene terpolymer) is the most commonly used material for this surface, and has been in use for a few decades now. TPO (thermoplastic polyolefin) is the newest type of membrane, and is less common than EPDM. Unlike TPO, you can use EPDM liquid rubber to refresh your EPDM membrane’s surface.

If you have your RV’s manual, check to see if it specifies what your roofing material is made of. If you can’t locate this information, there are other ways to tell which kind of rubber RV roofing system you have. The two main ways to determine the type are:

  • Observing the surface for oxidation – EPDM oxidizes over time, shedding some of its outer layer and producing gray or white streaks which run down the side of the motorhome. TPO does not shed, therefore you will not see any oxidation streaks. The wear on the former type can easily be addressed to EPDM liquid rubber.
  • Checking the texture – EPDM is very slippery when it becomes wet. TPO, by contrast, does not become slippery. Use care when utilizing this method to figure out which material is used – walking on your RV roof should always be done with caution.

Understand Maintenance and Repair

If you have a TPO coatings, you will not likely have to do much repair outside of taping seams or vent joints that become damaged with time and wear. TPO roofs should be replaced by a professional, as EPDM liquid rubber should not be used on this material.

If you do notice shedding, chalking or oxidation on your roof’s coatings, you’ll want to keep a close eye on its condition to make sure it doesn’t deteriorate to a point where you develop leaks. EPDM liquid rubber may be applied in order to create a fresh barrier and improve the look of the worn surface.

No matter which kind of RV roof Coatings you have, you need to keep it clean (plain soap and water typically do the trick) and be sure to routinely inspect vent joints and seams for damage and gaps. If you find that your EPDM roof has issues that need repairing, this can easily be accomplished using RV repair tape along with EPDM liquid rubber designed to duplicate the UV protection and waterproof nature of the original installed surface.

Routine care and maintenance will keep you and your family dry on the road and keep the value of your RV right where you want it.

Understanding the Benefits of Liquid Roof Coatings

For RV and camper enthusiasts, there are few things scarier than the idea of a roof leak. If not attended to promptly, this dreaded event can lead to very serious and expensive damage to your investment. Whether you’ve already got water dripping into the inside of your rig, or you’re just trying to get a jump on preventing future problems, the important thing is to be proactive and not wait until there’s a major issue. Liquid roof coatings provides a simple, easy to use solution to fixing leaks and heading off future ones.

Where to Start

If you’ve already got an RV or camper roof leak, the first thing you need to do is determine where it’s coming from. This can be accomplished by way of either a smoke test, or an air pressure leak test. You can have these performed by an RV shop or attempt to do the diagnosis yourself.

If your roof simply appears to be in bad shape, with tears, cracks, or thinning areas in the EPDM (ethylene propylene diene terpolymer), liquid roof coatings can be an effective way of sealing off vulnerable areas so that you don’t risk moving on to the leaking stage.

How It Works

While there are two types of rubber roofs on modern RVs, EPDM and TPO (thermoplastic polyolefin), TPO typically doesn’t need to be treated in any way. If this material does happen to need some attention, there are special products designed to work with these roofs. EPDM, on the other hand, may need refreshing or repairing from time to time. That’s where liquid roof coatings comes in.

EPDM-compatible roof repair products come in an easy to apply form which is simply painted onto the roof’s surface. They can be used on a wide variety of substrates, including rubber, metal, fiberglass, and more. One of the most popular brands, Liquid Roof, offers several valuable benefits:

  • UV and ozone resistant
  • Mold and mildew treated
  • Waterproofs instantly
  • Works against ponding water
  • Flexible and impervious to freezing temperatures
  • Easy, one-coat application

In addition, this product comes with a 10-year warranty. When deciding on a liquid roof coatings solution, keep in mind that investing in a higher quality product will pay off in the long run in the form of less frequent applications.

How to Apply Liquid Roof Coatings

Be sure to prepare the roof’s surface ahead of time by cleaning the dirt off and cutting away any old, damaged caulk or roofing material in order to create as smooth a surface as possible. Seal any seams and flashing with RV repair tape like EternaBond (just remember that once you put the tape down, it’s stuck for good – so be sure you have it placed correctly). Then you can either apply liquid roof coatings to the entire surface, or just in the areas in need of attention.

When it comes to ensuring your RV or camper – and everyone inside – stays dry and safe, liquid roof coatings is a great way to fix the inevitable challenges that come with recreational vehicle ownership.

What Are Liquid Roof Coatings?

When you think of something that would keep your RV safe from leaks, liquid probably isn’t the first word that jumps to your mind. After all, don’t you want to keep liquid off the roof? Well, this is a very different type of liquid, and once you apply it and it dries, it becomes the perfect barrier that will protect your RV from the elements. Liquid Roof coatings have a number of benefits that will

This type of coating is frequently used for RVs, but you can find it in use for a variety of other roofs and purposes as well. Whenever there is a flat roof that needs to have protection from the elements, these Liquid roof coatings are one of the best options to have. They work simply, and they offer a number of benefits.

What Are the Benefits?

The Liquid roof coatings have the ability to stop nasty leaks in your RV roof and to do so quickly. If you’ve been worried about a leak, applying a coat of the product to the roof can take care of it in a matter of days, or less depending on how long it takes to cure. High quality products also have UV and ozone protection. They are able to deal with a number of different types of weather conditions as well. No matter how hot or cold it gets where you take your RV, the coating should keep your RV safe and dry.

You are able to use the product on a number of different areas of the roof on your RV, as well as other areas around the house. It can work to seal other types of roofs, not just RVs. It can help to seal hoses, belts, tubing, speaker cons, and much more.

The product is waterproof and can work with many different types of materials including thermoplastics, modified asphalt, and even liners for pond leaks. Once you add the coating, it can last for decades.

Does It Work for All Repairs?

The Liquid roof coatings are very impressive, and they can work to stop many different types and sizes of leaks and to fix issues with the roof. However, they can’t do everything. If you happen to have a large hole in the roof, you will need to patch it and repair it first, and then add the coating over the top of it. If the hole is extremely large or difficult, you might find it easier to get some help from RV professionals for the repair. Then, once the repair is complete, you can add your own Liquid roof coatings for that added level of protection.

Before a Problem Arises

Many RV owners have started to use Liquid roof coatings on their RV before they actually have any leaks to take care of as a bit of preventative protection. This can help to reduce the risk of ever developing a leak in the roof of your RV, and it might be something you want to consider.

How To Install liquid roof coatings

An RV is certainly a great way to enjoy the American outdoors. It is a considerable investment, however, so you want to do whatever it takes to protect its most important components. Because of their unique nature, motor homes and RVs have a roof that is highly susceptible to environmental elements, so it is important to make sure that they are properly maintained at all times. This includes fixing any leaks as soon as they happen to occur. Many of the RVs on the market today come installed with either rubber or TPO roofs. This is because they are the most flexible and lightweight products on the market. Some manufacturers, however, will opt for an aluminum or fiberglass material because of the hard surface. They all look good, but the rubber and TPO roofs seem to attract more damage, particularly from objects that hang overhead, such as tree branches. For their part, the aluminum and fiberglass roofs seem to develop more stress based cracks, and they are susceptible to oxidation. No matter what style of roof is on your RV, however, it will almost certainly leak if not properly attended to.

Properly Maintain the Roof of Your RV

Obviously, the goal is to never have a leak on your roof in the first place. To make this happen, you will need to commit to reseal all of the seams and penetrations of the roof on a consistent and yearly basis. Even with proper maintenance, however, the chances are good that the roof may develop a leak eventually. When it does, do not panic, but do get it fixed as quickly as possible before it becomes a major issue. Occasionally, you will be able to locate the source of the leak almost immediately, because water will be falling inside the RV itself. It is the leak you do not see, however, that can cause the most trouble for you.

Install Liquid Roof Coatings

Once you have located the liquid roof coatings, it is recommended that you consider applying a bonding component, such as EternaBond. This is probably the most effective, and easiest, way to install the liquid roof coatings and keep the problem from becoming bigger. The product dries fast and is easy to apply. It works by creating a waterproof seal that is permanent. The great part about a sealant such as this is that it will work on any of the types of roofs that are on RVs today. There will be no additional products to purchase, and you simply clean up the area after application and your roof will look as good as new again.

A proper sealant such as EternaBond will have a typical shelf life of 1 years. Anytime you see a leak appear, as long as you keep the product on hand, you will be able to quickly make the repair yourself. It is important to constantly monitor your roof for such liquid roof coatings in order to install the problem before it becomes a major issue.

The Best Way to Elastomeric Roof Coatings

Nothing ruins your day quite like realizing you have a roof that leaks. Obviously, this means taking some immediate action if it’s raining outside, to ensure the water doesn’t do any more damage than you can help. After that, of course, you now have a new project to look forward to and it’s definitely not one you can just put off for a weekend you have open. Fortunately, if you find yourself needing to fix a elastomeric roof that coatings, there’s an amazing rubber out there that will absolutely be up for the job.

EPDM

The rubber we’re talking about is called EPDM. It’s not a natural rubber, but instead a synthetic version that is made from natural oil and gas. EPDM is quickly surpassing all other forms of rubber as the most used version in the entire world. This is for good reason when you consider all that the product can do and how much more science is learning to do with it as the years go by.

Easy to Apply

One of the best parts about this remarkable rubber is that, for all its many benefits, EPDM is still extremely easy to apply. If you had a large surface area you were installing it on, you may want to hire professionals. However, if all you need to do is fix a couple elastomeric roof coatings, you can easily handle the project on your own.
EPDM comes in one of two forms, both of which can be used to elastomeric roof coatings. This rubber is often produced in solid form in thin sheets. The sheets are then rolled into large spools and sold that way. You can lay down just the right amount over the damaged area and apply an adhesive to make certain it stays in place. The second version of EPDM comes in liquid form.

Durable

Despite how easily this product can be applied to all your elastomeric roof coatings, it won’t be stripped away without a fight. EPDM is well known in the industry for being one of the most durable forms of rubber available to consumers.
Whether you live in the frigid north or the blazing hot south, EPDM is still the product for you. Considering the U.S. Army and even NASA use this product, you better believe it’s extremely strong. Tests have even been done that prove it can stand its ground at 300 degrees Fahrenheit all the way down to negative 40 degrees.

Affordable

While you may be right to expect that this incredibly solution to your elastomeric roof coatings would cost you an arm and a leg, you’ll most likely be pleasantly surprised by the true cost. Making the price even cheaper is the fact that EPDM can last for decades without any demanding maintenance outside of the normal cleaning your roof needs. Whether you decide to do it on your own or hire professionals, your budget will remain intact.
The moment you discover your elastomeric roof coatings, start using EPDM to make it whole again. One applications should be all it takes for decades of protection.