The Best Way to Elastomeric Roof Coatings

Nothing ruins your day quite like realizing you have a roof that leaks. Obviously, this means taking some immediate action if it’s raining outside, to ensure the water doesn’t do any more damage than you can help. After that, of course, you now have a new project to look forward to and it’s definitely not one you can just put off for a weekend you have open. Fortunately, if you find yourself needing to fix a elastomeric roof that coatings, there’s an amazing rubber out there that will absolutely be up for the job.

EPDM

The rubber we’re talking about is called EPDM. It’s not a natural rubber, but instead a synthetic version that is made from natural oil and gas. EPDM is quickly surpassing all other forms of rubber as the most used version in the entire world. This is for good reason when you consider all that the product can do and how much more science is learning to do with it as the years go by.

Easy to Apply

One of the best parts about this remarkable rubber is that, for all its many benefits, EPDM is still extremely easy to apply. If you had a large surface area you were installing it on, you may want to hire professionals. However, if all you need to do is fix a couple elastomeric roof coatings, you can easily handle the project on your own.
EPDM comes in one of two forms, both of which can be used to elastomeric roof coatings. This rubber is often produced in solid form in thin sheets. The sheets are then rolled into large spools and sold that way. You can lay down just the right amount over the damaged area and apply an adhesive to make certain it stays in place. The second version of EPDM comes in liquid form.

Durable

Despite how easily this product can be applied to all your elastomeric roof coatings, it won’t be stripped away without a fight. EPDM is well known in the industry for being one of the most durable forms of rubber available to consumers.
Whether you live in the frigid north or the blazing hot south, EPDM is still the product for you. Considering the U.S. Army and even NASA use this product, you better believe it’s extremely strong. Tests have even been done that prove it can stand its ground at 300 degrees Fahrenheit all the way down to negative 40 degrees.

Affordable

While you may be right to expect that this incredibly solution to your elastomeric roof coatings would cost you an arm and a leg, you’ll most likely be pleasantly surprised by the true cost. Making the price even cheaper is the fact that EPDM can last for decades without any demanding maintenance outside of the normal cleaning your roof needs. Whether you decide to do it on your own or hire professionals, your budget will remain intact.
The moment you discover your elastomeric roof coatings, start using EPDM to make it whole again. One applications should be all it takes for decades of protection.

Why Is Liquid Roof Coatings the Best Choice?

Does your roof need to be coated? If so, you’re probably not in the mood to weigh all your options and take a lot of time to look at each and every one, less you make a mistake. Every second you spend trying to figure out how to get that roof fixed, you run the risk of something worse happening. Fortunately, while there are more options than ever before for fixing your roof, liquid roof should make the choice a relatively easy one. This remarkable material can be found on top of roofs belonging to successful companies like:

  • Hampton Inn
  • UPS
  • Dow Chemical Corp
  • Piggly Wiggly Grocery
  • Tesla Motors

Even NASA relies on liquid roof. Chances are, if it works for them, you can trust liquid roof for your liquid roof coatings needs too.

Stands up to Any Climate

Unlike many other options, you don’t have to worry about the environment you live in when you choose liquid roof coatings products. This synthetic rubber has been tested at 300 degrees Fahrenheit and didn’t fold, so no matter how much sun your building gets, you don’t have to worry that liquid roof will let you down.

It can handle extremely low temperatures too. Liquid roof has been tested at temperatures as low as 40 degrees Fahrenheit. Again, the liquid rubber pulled through.

Virtually Unrivaled

You’d have to spend a lot of money before you’d find any type of liquid roof coatings or otherwise that could stack up against roof coatings. Consider, for example, that accelerated aging tested has been used to put the rubber up against other popular—and expensive—products like elastomeric applications (including urethane). Despite all the qualities those products can tout, EPDM as still found to perform for three times as long.

Versatile

While it’s true that roof coating is usually used as a liquid roof coatings product on flat surfaces that greatly underestimates how much this form of rubber can do. For example, the stadium that the New England Patriots play in benefits from liquid roof, despite the fact that it doesn’t actually have a full roof. Roof Coatings is still used for many of the covering areas, nonetheless, despite the fact that not all of them are perfectly flat and smooth.

Long Lasting

Although this form of liquid roof coatings clearly has plenty of benefits to enjoy, the most important one is probably its overall performance. While we’ve mentioned that it can stand strong against all kinds of temperatures, it’s also important to appreciate how long this form of liquid roof repair will protect your structure too.

Roof Coatings has easily survived on roofs for 20 years or more. In fact, don’t be surprised if the warranty for your liquid roof coatings product covers a couple decades. When you use liquid roof to coating your roof, you may just want to cover the entire surface as a preemptive measure.

The next time you need roof coatings, don’t waste any time in selecting a product. Roof Coatings is, by far, your best choice and one countless people already depend on.